| Porsche 911 Suspension - Page 7 |
QuickChange Spring Plate Kit |
QuickChange spring plates make fast work of torsion bar re-indexing and replacement. A screw-type adjuster makes corner balancing and ride height adjustment a breeze. These plates pair the high quality of the factory design with ease of servicing. - 5 minute torsion bar changes
- Fast and easy ride-height adjustment
- Accepts standard bushings
- Quiet operation, no noises
Elephant Racing's QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained, and you don't even need to remove the wheels from the car. Changing the rear torsion bars is now a 5 minute per side operation!
Unlike other aftermarket spring plates, QuickChange Spring Plates bolt the plates together. This prevents the plates "halves" from sliding against each other and eliminates failures and metallic clicking noises common with competing products.
NOTE: Use with any standard size bushing - not included - PolyBronze Bearings recommended. QuickChange can also be added to cars with Elephant Racing's ASP when installing the splined hub option. |
|
ERMP-2080901 | QuickChange Spring Plate Kit, pair, 911/912 (1965-68) [More Info] | $451.56 |  |
ERMP-2080902 | QuickChange Spring Plate Kit, pair, 911/912/911 Turbo (1969-86) [More Info] | $454.00 | |
ERMP-2080903 | QuickChange Splined Hub Kit, for cars with ER ASP, pair, 911/912/911 Turbo (1969-86) [More Info] | $371.88 | |
Suspension Bushings  |
| Perhaps the best thing that you can do to help an aging suspension is to replace old, brittle bushings with new high-tech, space-age, low-fat, super-duper ones. The newer bushings are made from better materials and will not wear out as easily as 25+ year old rubber ones. NOTE: Weltmeister Rear Banana Arm bushings have the bushing washers impregnated into the bushing. You do not need to use the OEM washer when using this type of bushing. Note: Front Cup Bushings must be slit on one side to fit around bar. |
|
| Front A-Arm Bushings |
| 99-3014-340-M230 | Front A-Arm Front Bushing Kit (Set of 4) 2557 front, 2558 rear, 911 (1968-73) [More Info] |  |
| $19.00 | |
| Factory Spring Plate Bushings |
| 644-333-131-00-M100 | Inner Spring Plate Bushing (2 per car, sold individually), 911/912 (1965-67)
Brand: Genuine Porsche [More Info] | |
| $17.50 | |
| 901-333-195-00-OEM | Outer Spring Plate Bushing (2 per car, sold individually), 911/912 (1965-67)
Brand: Genuine Porsche [More Info] | $27.25 | |
| Rear Spring Plate Bushings |
PB-356 | Rear Spring Plate Inner Bushing (2 per car, sold individually), 911/912 (1965-68), Each [More Info] | $14.99 | |
PB-004 | Rear Spring Plate Inner Bushing (2 per car, sold individually), 911/912 (1969-73), Each [More Info] | $18.95 | |
PB-004 | Rear Spring Plate Outer Bushing (2 per car, sold individually), 911/912 (1965-73), Each [More Info] | $18.95 | |
| Rear Trailing Arm Bushings |
| 99-3015-333-M230 | Rear Trailing Arm Inner Suspension Bushing Kit, Set of Four, 911/912 (1969-89) [More Info] | |
| $9.00 | |
| 901-331-059-00-M100 | Rear Trailing Arm Inner Suspension Bushing, OE Rubber (4 per car, sold individually), 911/912 (1965-73), Each
Brand: Genuine Porsche [More Info] | |
| $47.75 | |
| Elephant Racing PolyBronze Suspension Bushing Sets |
| Unlike the polyurethane bushings that may require custom lathe fitting to install properly, these Elephant Racing PolyBronze Suspension Bearings require no custom fitment and never exhibit those annoying squeaks. Unlike the original rubber bushings, Elephant Racing PolyBronze Suspension Bearings provide a bronze-on-steel low friction surface, housed in a vibration absorbing polyurethane jacket. The inner figure 8 groove with built in grease nipple, allow for quick access when relubricating and provide squeak free & friction free movement. |
|
| ERMP-2051400 | Elephant Racing, Front PolyBronze Suspension Bushings, Set Of 4, 912/911 (1965-67) [More Info] | $260.00 | |
ERMP-2051500 | Elephant Racing, Front PolyBronze Suspension Bushings, Set Of 4, 912/911 (1968-73) [More Info] | $260.00 | |
| ERMP-2061400 | Elephant Racing, Rear Spring Plate PolyBronze Suspension Bushings, Set Of 4, 912/911 (1965-67) [More Info] | $325.00 | |
ERMP-2061500 | Elephant Racing, Rear Spring Plate PolyBronze Suspension Bushings, Set Of 4, 912/911 (1968-73) [More Info] | $315.00 | |
| ERMP-2061401 | Elephant Racing, Rear Spring Plate Poly Bronze Suspension Bushing Kit For Weltmeister/Sway-A-Way Adjustable Spring Plates ONLY, Set Of 4, 912/911 (1965-67) [More Info] | $345.00 | |
ERMP-2061501 | Elephant Racing, Rear Spring Plate Poly Bronze Suspension Bushing Kit For Weltmeister/Sway-A-Way Adjustable Spring Plates ONLY, Set Of 4, 912/911/911 Turbo (1968-89) [More Info] | $335.00 | |
