Pelican Parts.com - Elephant Racing Front/Rear Monoball Cartridges


	These little gems will hold your camber settings lap after lap. If you want to be fast, your suspension pickup points must be rigid to hold suspension geometry in check even under the heaviest corner loads. Pivots points need to be friction free. Heavy corner loads generated by today’s stickier tire compounds easily compress and distort rubber bushings making it impossible to hold suspension settings. Camber, caster and toe flop around along with the bushings. Elephant Racing monoball cartridges replace the compliant upper strut and rear trailing arm rubber bushings with hardened-steel precision spherical bearings. Since they can’t compress, these monoballs hold suspension settings under the heaviest corner loads. Driver feedback becomes precise and positive. Precision hardened-steel spherical bearings Proprietary Weather Seal to prevent corrosion/contamination Eliminates rubber bushing compression Maintains alignment settings through turns Improves feel and driver feedback The cartridges are pre-assembled and install easily into factory camber plates using hand tools (can even be secured with a safety wire). Rear monoballs slide right into factory trailing arms. The proprietary weather seal design ensures years of trouble free service. Combine with Elephant Racing’s triangulated strut brace to achieve a rigid front suspension geometry that maintains settings under extreme braking and cornering loads. Rear Monoball cartridges are now available in weather-sealed (for ultimate longevity) or unsealed versions. The rebuild kits can be used for any Elephant Racing rear monoball cartridge.