| Porsche 911 Miscellaneous - Page 20 |
Replica Fuchs Alloy Wheels |
| Euromeisterญฎ presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows them to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeisterฎ Wheels utilize original factory offsets to fit 1965-89 911,912,930 with Carreraฎ or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porscheฎ vehicles. Center caps and lug nuts sold separate. |
|
PEL-915737 | Euromeister Alloy Replica Wheel, 16x7 (23.3 offset) this item has been discontinued and we have only one wheel in stock, Each [More Info] | $199.95 |  |
PEL-915738 | Euromeister Alloy Replica Wheel, 16x8 (10.6 offset), Each [More Info] | Temporarily unavailable | |
PEL-915739 | Euromeister Alloy Replica Wheel, 16x9 (15.0 offset) this item has been discontinued and we have only one wheel in stock, Each [More Info] | $249.95 | |
Cup Holder |
| This clever cup holder holds your favorite standard-size beverage (the opening is about 3-1/8" in diameter) without requiring ANY alterations or modifications to your interior. You simply slide it onto your seat rail and tighten the thumbscrew. The thumbscrew even has a rubber bumper at the tip to protect the rail! |
|
PEL-EVOSC91144 | Evo SuperCup Cup Holder, 911 (1965-98), 930, and 944 [More Info] | $49.99 | |
Finally, the cup-holder Porsche owners have always needed. Cups, cans and water bottles at your fingertips. Far enough over to avoid interference when shifting, yet at your fingertips when needed. The ingenuous design locks into your cigarette lighter port with an expanding plug and stays there until you remove it with a quick turn of the thumbscrew. All steel construction with an insulated end and black powder-coated for a tough, long-lasting finish. Are you tired of cup-holders that wont stick where you put them; drinks leaking into your door pockets because you forgot they were there when you closed the door? Tested with over 2 lbs. of ballast for over 2 months to ensure a strong and secure holder.
A cup-holder mounted closest to the center of the car is less likely to spill and the most convenient location for the driver. |
|
PEL-JM-CUP | Cup Holder, Aftermarket, 911 (1965-73), Each [More Info] | $37.75 | |
Fire Extinguisher |
| Double the size and fire-fighting-power of the smaller units. Attractive billet aluminum nozzle. Extinguishing agent: Halotron 1 (2.5 lb)
Extinguisher weight: 5.4 lb
14.8 in x 3.0 in
Width: 5.0 in
UL rating: 2B:C
Rechargeable
Steel canister
All metal valve construction
EPA approved
One year limited warranty |
|
PEL-HG250R | H3R HalGuard Halotron 1 Fire Extinguisher, 2.5 lb. (Red) [More Info] | $119.95 | |
Fire Extinguisher Mount |
| PCA driving events require cars to be equipped with a 2.5 lb. extinguisher within easy reach of the driver - requirements aside, it's a good idea to have a fire extinguisher in any valuable car. These Brey-Krause mounts conveniently locate the extinguisher in front of the driver or passenger seat. It moves with the fore/aft seat adjustment and thereby remains out of the way (Quick Release Clamp for fire extinguisher is sold separately). |
|
BK-R-2017 | Brey-Krause Fire Extinguisher Mount - 911 (1969-1973) [More Info] | $89.00 | |
| Fire Extinguisher Quick Release |
| This Quick-Release allows you to access your fire extinguisher quickly with just one hand! Holds a 2.5 pound H3R model HG250 extinguisher or an AMEREX model 417 extinguisher. Mounts with 4 bolts to existing brackets or any surface. |
|
BK-R-9520 | Brey-Krause Quick Release Fire Extinguisher Mount [More Info] | $239.95 | |
| Fire Extinguisher Roll-Bar Mounts |
| These brackets allow you to mount a fire extinguisher directly to your roll bar or roll cage. They can be used with either a standard 2.5 lb fire extinguisher mount or the R-9520 quick release mount. All aluminum construction makes for a safe mount that doesnt add a lot of weight to your car. Dont let a poorly secured fire extinguisher ruin your next trip to the track. Safety inspectors arent letting them pass and neither should you. |
|
BK-R-9521 | Brey-Krause roll bar Fire Extinguisher Mount, 1.5 in. and 40 mm [More Info] | $81.00 | |
BK-R-9522 | Brey-Krause roll bar Fire Extinguisher Mount, 1.75 in. [More Info] | $89.00 | |
| Buckley Racing Fire Extinguisher Mount |
| This affordable fire extinguisher mount allows you to place your Halon filled fire extinguisher in a very accessible location between the seats of your 911 based track car. The mount uses existing bolt locations to place it in position on the tunnel and directly above the parking brake pivot point. The parking brake and heater control levers remain accessible and operable. You will need enough space between the seats for the nozzle and handles. The extinguisher bracket holds the fire extinguisher in only 1 position. The space will require 2.25 inches on the passenger side and 2 inches on the drivers side at a point 8.5 inches above the steel floor and 5 inches in front of the parking brake pivot. |
|
BUC-010001 | Buckley Racing Fire Extinguisher Mount 911/911 Turbo (1965-89) [More Info] | $69.95 | |
