| Porsche 911 Miscellaneous - Page 18 |
Fire Extinguisher Mount |
| PCA driving events require cars to be equipped with a 2.5 lb. extinquisher within easy reach of the driver - requirements aside, it's a good idea to have a fire extinquisher in any valuable car. These Brey-Krause mounts conveniently locate the extinquisher in front of the driver or passenger seat. It moves with the fore/aft seat adjustment and thereby remains out of the way. |
|
BK-R-2017 | Brey-Krause Fire Extinguisher Mount - 911 (1969-1973) [More Info] | $89.00 |  |
| Fire Extinguisher Quick Release |
| This Quick-Release allows you to access your fire extinguisher quickly with just one hand! Holds a 2.5 pound AMEREX model 417 extinguisher. Mounts with 4 bolts to existing brackets or any surface. |
|
BK-R-9520 | Brey-Krause Quick Release Fire Extinguisher Mount [More Info] | $229.70 | |
| Fire Extinguisher Roll-Bar Mounts |
| These brackets allow you to mount a fire extinguisher directly to your roll bar or roll cage. They can be used with either a standard 2.5 lb fire extinguisher mount or the R-9520 quick release mount. All aluminum construction makes for a safe mount that doesnt add a lot of weight to your car. Dont let a poorly secured fire extinguisher ruin your next trip to the track. Safety inspectors arent letting them pass and neither should you. |
|
BK-R-9521 | Brey-Krause Rollbar Fire Extinguisher Mount, 1.5 in. and 40 mm [More Info] | $79.00 | |
BK-R-9522 | Brey-Krause Rollbar Fire Extinguisher Mount, 1.75 in. [More Info] | $89.00 | |
| Buckley Racing Fire Extinguisher Mount |
| This affordable fire extinguisher mount allows you to place your Halon filled fire extinguisher in a very accessible location between the seats of your 911 based track car. The mount uses existing bolt locations to place it in position on the tunnel and directly above the parking brake pivot point. The parking brake and heater control levers remain accessible and operable. You will need enough space between the seats for the nozzle and handles. The extinguisher bracket holds the fire extinguisher in only 1 position. The space will require 2.25 inches on the passenger side and 2 inches on the drivers side at a point 8.5 inches above the steel floor and 5 inches in front of the parking brake pivot. |
|
BUC-010001 | Buckley Racing Fire Extinguisher Mount 911/911 Turbo (1965-89) [More Info] | $69.95 | |
Smuggler's Box Cover |
| Rennline Smuggler's Box covers are a direct replacement for your factory cover. Perfect for the light weight race car or the performance street car. This is a ideal set up for those of you who have already relocated your battery but need a clean way to finish off the project. All aluminum construction and a perfect location to mount a battery cut off switch. All covers come with all stainless steel hardware and new aluminum hinges. |
|
REN-EL07S | Rennline Smugglers Box Cover - Silver, each, 911/911 Turbo (1965-89) [More Info] | $125.00 | |
| REN-EL07B | Rennline Smugglers Box Cover - Black, each, 911/911 Turbo (1965-89) [More Info] | $125.00 | |
Belts |
| Has it been a while since you replaced your belts? Replace them before you get stranded, get two and keep a backup in the trunk. |
|
999-192-176-50-M21 | Alternator Belt, 10 x 710 (Service-Free belt), 911 (1966-73), Each
Brand: Contitech [More Info] |  |
| $5.75 | |
999-192-176-50-M100 | Alternator Belt, 9.5 x 710 (NOT a Service-Free belt, may require retensioning), 911 (1966-73), Each
Brand: Genuine Porsche [More Info] | |
| $10.75 | |
999-192-030-40-M21 | Injection Pump Belt, 911 (1969-73), Each
Brand: Contitech [More Info] | |
| $10.25 | |
999-192-006-50-M21 | | $5.75 | |
Belts |
| Has it been a while since you replaced your belts? Replace them before you get stranded, get two and keep a backup in the trunk. |
|
999-192-176-50-M21 | Alternator or Air Pump Belt, 10 x 710 (Service-Free belt), 911 (1974-75), 911 (1980-89), 911 Turbo (1976-79), 911 Turbo (1986-89)
Brand: Contitech [More Info] | |
| $5.75 | |
999-192-176-50-M100 | Alternator or Air Pump Belt, 9.5 x 710 (NOT a Service-Free belt, may require retensioning), 911 (1974-75), 911 (1980-89), 911 Turbo (1976-79), 911 Turbo (1986-89), Each
Brand: Genuine Porsche [More Info] | |
| $10.75 | |
