| Porsche 911 & 912 Miscellaneous - Page 17 |
Alloy Wheel Center Caps |
Center Cap Security Locks
(Protect your investment from petty thieves) |
| Secure your original Fuchs center caps from theft by installing these billet aluminum locking rings. Fits inside Porsche O.E.M. Fuchs hubcaps (ring-clip style) that have 70mm openings. Sold as a set of four. |
|
PEL-PP905952 | Fuchs Center Cap Locking Rings, for caps w/ ring clips (70mm hole), Set of Four (not for 3-pronged caps) [Photo] | $39.95 |  |
Linea Corse Fox Wheels |
| They're here! These Linea Corse wheels are inspired by the original Fuchs design but made in 17-inch sizes to fit your classic 911! Fits 911SC/Carrera (1978-89) or cars with compatible wheel flares. Sold in complete sets of 4. Tires are not included. Accepts standard center caps - available separately. |
|
LC-FOX-1 | Linea Corse (Rota) Fox 1 (RSR) Wheel Set, includes: (2) Front - 17x7.5in (+35mm offset), (2) Rear - 17x9in (+16mm offset), bolt pattern - 5x130 [Photo] [Photo] | $1299.00 | |
LC-FOX-HB | Linea Corse (Rota) Fox Hyperblack Wheel Set, includes: (2) Front - 17x7.5in (+35mm offset), (2) Rear - 17x9in (+16mm offset), bolt pattern - 5x130 [Photo] [Photo] | $1199.00 | |
LC-FOX-3 | Linea Corse (Rota) Fox 3 (Flat Black w/ polished Satin Lip) Wheel Set, includes: (2) Front - 17x7.5in (+35mm offset), (2) Rear - 17x9in (+16mm offset), bolt pattern - 5x130 [Photo] | $1199.00 | |
LC-FOX-S | Linea Corse (Rota) Fox Flat Silver Wheel Set, includes: (2) Front - 17x7.5in (+35mm offset), (2) Rear - 17x9in (+16mm offset), bolt pattern - 5x130 [Photo] | $1199.00 | |
Replica Fuchs Alloy Wheels |
| Euromeisterญฎ presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows them to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeisterฎ Wheels utilize original factory offsets to fit 1965-89 911,912,930 with Carreraฎ or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porscheฎ vehicles. Center caps and lug nuts sold separate. |
|
PEL-915737 | Euromeister Alloy Replica Wheel, 16x7 (23.3 offset), Each [Photo] | $199.95 | |
PEL-915738 | Euromeister Alloy Replica Wheel, 16x8 (10.6 offset), Each [Photo] | $229.95 | |
PEL-915739 | Euromeister Alloy Replica Wheel, 16x9 (15.0 offset), Each [Photo] | $249.95 | |
Cup Holder |
Finally, the cup-holder Porsche owners have always needed. Cups, cans and water bottles at your fingertips. Far enough over to avoid interference when shifting, yet at your fingertips when needed. The ingenuous design locks into your cigarette lighter port with an expanding plug and stays there until you remove it with a quick turn of the thumbscrew. All steel construction with an insulated end and black powder-coated for a tough, long-lasting finish. Are you tired of cup-holders that wont stick where you put them; drinks leaking into your door pockets because you forgot they were there when you closed the door? Tested with over 2 lbs. of ballast for over 2 months to ensure a strong and secure holder.
A cup-holder mounted closest to the center of the car is less likely to spill and the most convenient location for the driver. |
|
PEL-JM-CUP | Cup Holder, Aftermarket, 911 (1965-73), 912 (1965-69), Each [Photo] | $37.75 | |
Fire Extinguisher Mount |
| PCA driving events require cars to be equipped with a 2.5 lb. extinquisher within easy reach of the driver - requirements aside, it's a good idea to have a fire extinquisher in any valuable car. These Brey-Krause mounts conveniently locate the extinquisher in front of the driver or passenger seat. It moves with the fore/aft seat adjustment and thereby remains out of the way. |
|
BK-R-2017 | Brey-Krause Fire Extinguisher Mount - 911 (1969-1973) [Photo] | $89.00 | |
| Fire Extinguisher Quick Release |
| This Quick-Release allows you to access your fire extinguisher quickly with just one hand! Holds a 2.5 pound AMEREX model 417 extinguisher. Mounts with 4 bolts to existing brackets or any surface. |
|
BK-R-9520 | Brey-Krause Quick Release Fire Extinguisher Mount [Photo] [Photo] | $229.70 | |
| Fire Extinguisher Roll-Bar Mounts |
| These brackets allow you to mount a fire extinguisher directly to your roll bar or roll cage. They can be used with either a standard 2.5 lb fire extinguisher mount or the R-9520 quick release mount. All aluminum construction makes for a safe mount that doesnt add a lot of weight to your car. Dont let a poorly secured fire extinguisher ruin your next trip to the track. Safety inspectors arent letting them pass and neither should you. |
|
BK-R-9521 | Brey-Krause Rollbar Fire Extinguisher Mount, 1.5 in. and 40 mm [Photo] [Photo] | $79.00 | |
BK-R-9522 | Brey-Krause Rollbar Fire Extinguisher Mount, 1.75 in. [Photo] [Photo] | $89.00 | |
