Porsche 911 & 912 Interior Accessories

Search our site:

Finally, the cup-holder Porsche owners have always needed. Cups, cans and water bottles at your fingertips. Far enough over to avoid interference when shifting, yet at your fingertips when needed. The ingenuous design locks into your cigarette lighter port with an expanding plug and stays there until you remove it with a quick turn of the thumbscrew. All steel construction with an insulated end and black powder-coated for a tough, long-lasting finish. Are you tired of cup-holders that won’t stick where you put them; drinks leaking into your door pockets because you forgot they were there when you closed the door? Tested with over 2 lbs. of ballast for over 2 months to ensure a strong and secure holder.

A cup-holder mounted closest to the center of the car is less likely to spill and the most convenient location for the driver.

The Rennline shift coupler cover is an attractive replacement for the stock cover. It is made of perforated 1/8" aluminum and comes with stainless steel hardware. This is the perfect item to jazz up the stripped-out interior of your track 911 or give that street 911 a race car look.

Rennline's emergency brake & heater control block-off plate will dress up the interior of your dedicated track 911 that has the emergency brake and heater controls removed from the center tunnel between the seats. This Aluminum block-off plate comes pre-drilled and with stainless steel mounting hardware for a quick and easy installation.

Rennline’s Track Mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only product of its kind on the market, Rennline’s Track Mats are inspired by the floor design of factory Cup Cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving.

Rennline’s Track Mats are constructed from lightweight anodized aluminum, weigh less than two pounds, and are stamped with reinforcing ribs for strength. They fit precisely over the contours of Porsche floors and affix with Velcro or can be permanently mounted if desired.

For automobiles with molded one piece carpets, Track Mats fit directly over the non-removable floor carpeting and can be covered completely with the factory floor mats when not in use. One of the main benefits of Track Mats for these automobiles is the protection they afford the floor carpeting, which wears rapidly when the loose floor mats are removed for track driving.

For automobiles with removable carpets, Track Mats attach directly to the floors with Velcro, bind the inner rocker and center tunnel carpeting in place, and prevent wear to the soft sound deadener surface of the factory floor pans. When not in use, Track Mats can be removed or simply covered with the stock floor mats.

The Smart-Clip Mirror snaps onto a vehicle's factory installed rear view mirror. This extra-wide mirror helps to eliminate blind spots and makes lane changes and back up maneuvers much safer. The mirror is vibration-free and shatterproof. Perfect for drivers of all ages and skill levels.
Dimensions: 15-1/2" x 2-3/8"

Search our site: