| Porsche 911 CIS Fuel Injection - Page 3 |
CIS Intake Manifold Hoses  |
| Old manifold hoses have a tendency to crack and leak. New replacements are worth more than enough in saved headaches while troubleshooting injection problems. Sometimes referred to as runner sleeves. |
|
| 911-110-885-01-M260 | Intake Manifold Hose, 911T (1973 1/2), Each Brand: OEM [Photo] [Photo] |  |
| $8.75 |  |
CIS Cold Start Valves |
| The cold start valve supplies extra fuel to the engine when starting the engine cold. A non-functional valve results in poor idling and tough starting when cold. |
|
| 911-606-101-00-OEM | Cold Start Valve, 911T (1973 1/2), Each Brand: Genuine Porsche | $195.00 |  |
CIS Warm Up Regulators |
| The warm-up regulator supplies extra fuel to the car to allow it to warm up under the proper mixture conditions. If your car is having trouble starting and running during warm-up, it may be time to replace the regulator. |
|
 911-110-935-AX-M100 | Fuel Distributor, Rebuilt, 911T (1973 1/2) Brand: Genuine Porsche Note: 1973-74 cars also require adapter kit sold below [Photo] |  |
| $1293.25 |  |
 1-437-000-800-M14 | Adapter Kit for Warm Up Regulator, 911T (1973 1/2), Each [Photo] | No Longer Available | |
| Warm-Up Regulator Replacement |
The UTCIS Regulator replaces the warm-up regulator found in vehicles which employ the CIS fuel system. This replacement part installs in minutes and boasts an intelligent, adaptive design, delivering peak performance during warm and cold start conditions. Never get stuck again with a hot engine which won't start.
Features:- Adjustable Control Pressure - compatible with all CIS equipped vehicles
- Acceleration and Full-Throttle Enrichment provided from built-in Manifold Absolute Pressure Sensor
- Pressure Gauge
- Great for marginal emissions
- Rugged design
- Easy Installation
- 5 year limited warranty
- No Core Required!
|
|
| 10-0740-100-M620 | UTCIS Warm-Up Regulator, 911 (1973-74 w/ CIS) requires (1) 1-437-000-800 kit and (1) 911-110-097-01 fuel line Brand: UnwiredTools [Photo] |  |
| $539.00 |  |
 1-437-000-800-M14 | Adapter Kit for Warm Up Regulator, 911 (1973-74 w/ CIS) Brand: Bosch [Photo] | No Longer Available | |
| 911-110-097-01-M20 | Fuel Line, 911 (1973-74 w/ CIS) Brand: Cohline [Photo] |  |
| $9.75 |  |
Fuel Tank Level Sender |
| Not sure what your fuel level is? Worried about having to call AAA on the side of the road? Replace your sender and toss out that spare can of gas in the front trunk. Make sure to get a new gasket too. |
|
| 901-741-801-00-M82 | Fuel Tank Level Sender, 911/912 (1965-73), Each Brand: VDO [Photo] [Photo] |  |
| $100.75 |  |
| 914-201-891-00-M82 | Fuel Tank Level Sender Gasket, 911 (1965-73), Each Brand: VDO [Photo] |  |
| $5.50 |  |
Fuel Filler Sleeve |
| This is the small sleeve that fits around the fuel filler. |
|
| 901-201-591-20-M100 | Fuel Filler Neck Sleeve (Neck to Body), 911, 912, 911 Turbo (1965-89) Brand: Genuine Porsche [Photo] |  |
| $41.00 |  |
| 911-201-515-00-OEM | Fuel Filler Neck Sleeve (Neck to Tank), 911, 912, 911 Turbo (1965-89) Brand: Genuine Porsche [Photo] | $31.50 |  |
Digital Air/Fuel Ratio Meter |
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meters digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. - Patented Direct Digital Wideband Technology
- Wideband O2 Compatible with ALL fuel types
- Single or Dual Channel Version Available
- OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
- Log directly to SD card (included)
- Playback log data on screen and/or with powerful LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!
More accessories for your LM-1 available here.
For permanently installed tuning solutions, click here.
Manufacturer: Innovate Motorsports Click here to visit the manufacturer's home page. |
|
 INN-3806 | Innovate Motorsports LM-2: Digital Air/Fuel Ratio Meter [Photo] [Photo] | $479.00 |  |