|  | | | Porsche 911 Pistons, Cylinders, and Heads - Page 1 | Piston and Cylinder Sets | | Original Mahle Piston & Cylinder Sets | These original Mahle piston and cylinder sets are tried and true. Refurbish your tired motor with a new set constructed to factory specs to restore the factory performance of your 911. Euro specs are available too.
NOTE: A single "Original Piston & Cylinder Set" consists of six (6) of each of the following: piston, Nikasil cylinder, ring set, pin, and twelve (12) pin circlips. These piston and cylinder sets are only available in sets of 6 -- we are not capable of selling them individually at this time.
Building a bigger powerplant for your early car? Then you might be looking for the upgraded piston and cylinder sets we have available in our 1974-89 911 section. |
| | 901-103-902-00-SET | Piston/Cylinder Set of 6, 2.0L (130HP, 80mm bore), 911 (1965-67)
Brand: Mahle [More Info] | $6916.50 |  | | A-103-903-01 | Piston/Cylinder Set of 6, 2.0L (110HP), 911T (1968-69),
Brand: Genuine Porsche [More Info] | No Longer Available | | | A-103-909-01 | Piston/Cylinder Set of 6, 2.0L (140HP), 911E (1969)
Brand: Genuine Porsche [More Info] | No Longer Available | | 
901-103-906-00-SET | Piston/Cylinder Set of 6, 2.0L (160HP, 80mm bore), 911S (1967-68)
Brand: Mahle [More Info] | $3553.50 | | | A-103-911-01 | Piston/Cylinder Set of 6, 2.0L, 911S (1969) [More Info] | No Longer Available | | | C-103-914-02 | Piston/Cylinder Set of 6, 2.2L Zenith Carbs (125HP), 911T (1970-71)
Brand: Genuine Porsche [More Info] | No Longer Available | | | C-103-916-01 | Piston/Cylinder Set of 6, 2.2L Mech Injection (155HP), 911E (1970-71)
Brand: Genuine Porsche [More Info] | No Longer Available | | 
911-103-918-01-SET | Piston/Cylinder Set of 6, 2.2L Mech Injection (180HP, 84mm bore), 911S (1970-71)
Brand: Mahle [More Info] | $4291.50 | | | 911-103-942-01-SET | Piston/Cylinder Set of 6, 2.4L Mech Injection, (84mm bore), 911T (1972-73)
Brand: Mahle [More Info] | $2493.50 | | | C-103-943-01 | Piston/Cylinder Set of 6, 2.4L Mech Injection, 911E (1972-73)
Brand: Genuine Porsche [More Info] | No Longer Available | | 
911-103-944-01-SET | Piston/Cylinder Set of 6, 2.4L Mech Injection, (84mm bore), 911S (1972-73)
Brand: Mahle [More Info] | $4039.50 | | | C-103-940-02 | Piston/Cylinder Set of 6, 2.4L CIS, 911T (1973 1/2)
Brand: Genuine Porsche [More Info] | No Longer Available | | | 10-0174-094-SET | Piston & Cylinder Set of 6, (90mm bore, 8.5:1 comp), 911S Euro 2.7 (1974-77)
Brand: Mahle [More Info] | $3907.50 | | LN Engineering's Nickies Cylinder Sets  | LN Engineering's Nickies cylinders look great and perform even better. They are machined out of a specially extruded alloy that is up to 50% stronger, 45% more thermally conductive, and much less brittle than the alloys used by Mahle for cast factory cylinders. With 6.5 fins per inch versus the typical 4 fins per inch on cast cylinders, a phenomenal 60% increase of surface area is achieved providing improved heat transfer. Nickel-silicon-carbide (known as Nikasil), which has a reputation for providing hundreds of thousands of miles of worry-free service, adheres excellently to this alloy, giving top-notch reliability. The finished product is media blasted and acid etched to roughen the surface, further increasing cooling ability by increasing air turbulence. All of these improvements and they weigh less too! Why go back to factory when you can build a cooler-running and more durable engine instead!
NOTE: ARP or RACEWARE high-strength head studs are strongly recommended for use with Nickies. Pistons and hardware sold separately. Most orders are custom built and will take 6-8 weeks for delivery. For more information about Nickies, visit the manufacturer here. |
| | LN-103-80 | LN Engineering Nickies Cylinders, set of 6, 2.0 80mm, 911 (1965-69) [More Info] | $2839.00 | | | LN-103-81 | LN Engineering Nickies Cylinders, set of 6, 2.0 81mm, 911 (1965-69) [More Info] | $2839.00 | | 
PEL-LN-103-84 | LN Engineering Nickies Cylinders, set of 6, 2.2/2.4l, 84mm bore, 911 (1970-73) [More Info] | $2839.00 | |
PEL-LN-103-85 | LN Engineering Nickies Cylinders, set of 6, 2.2/2.4l, 85mm bore, 911 (1970-73) [More Info] | $2839.00 | |
PEL-LN-103-86 | LN Engineering Nickies Cylinders, set of 6, 2.2/2.4l, 86mm bore, 911 (1970-73) [More Info] | No Longer Available | | | LN-103-875 | LN Engineering Nickies Cylinders, set of 6, 2.2/2.4L 87.5mm, 911 (1970-73) [More Info] | $2839.00 | |
PEL-LN-103-89 | LN Engineering Nickies Cylinders, set of 6, 2.5l, 89mm bore, 911 (1970-73) [More Info] | $2839.00 | | | LN-103-89SF | LN Engineering Nickies Cylinders, set of 6, 2.2/2.4L 89mm, slip fit, 911 (1970-73) [More Info] | $2839.00 | |
| |
|
|
|
