| Porsche 911 Oil Circulation - Page 13 |
Motor Oil & Additives |
| Lubro Moly Oil Additives and Cleaners |
| Lubro Moly MotorProtect Engine Treatment. Fully synthetic oil additive. It significantly reduces wear. High pressure wear protection additives form a very thin film on all mating partners in the engine, that is compliant and very slippery under wear conditions. The film lasts up to 50.000 km. This results in the following advantages: Significant wear reduction, Longer engine life, Reduction of fuel consumption and pollutant levels thanks to the anti-friction effect, Superior engine performance, quiet operation. For more information, see the Liqui-Moly Website. |
|
2053-M19 | Lubro Moly Motor Protect Engine Treatment, 500ml bottle [More Info] |  |
| $23.75 |  |
| Lubro Moly MotorClean Engine Treatment. Scrubs and cleans the engine from inside. The highly effective detergent additives loosen sludge and lacquer deposits and keep solid and liquid contaminants in suspension. At the oil change they are drained out with the used oil. After an oil change thus prepared, the fresh oil develops its full potential: the engine regains its full power. It runs with less wear. The exhaust gas performance is improved. Oil starvation is prevented. |
|
2037-M19 | Lubro Moly Motor Clean Engine Treatment, 500ml bottle [More Info] | |
| $11.25 | |
| Lubro Moly MO2 Motor Oil Friction Treatment. The anti-friction lubricant MoS2 forms a highly load-resistant lubricating film on all rubbing and sliding surfaces. It reduces friction and guarantees easier running of the engine. As a result there are the following advantages: significant reductions in fuel and oil consumption, scientifically proven wear reduction of more than 50%, fewer break-downs, and emergency running properties. Tested for catalytic converters and turbochargers. |
|
2009-M19 | Lubro Moly M02 Motor Oil Friction Treatment, 300ml/can [More Info] | |
| $6.50 | |
| Lubro Moly MO2 Transmission Friction Treatment. An additive specially developed for manual gearboxes, differentials, and steering units with oil bath. It reduces wear significantly and lowers peak operating temperatures: quieter operation, easier shifting, better running in. The gearbox runs quietly and warms up less. Even older gearboxes regain running smoothness and performance thanks to the "repair" of the gear surfaces. Increases operating safety and provides emergency running properties through the MoS2. |
|
2019-M19 | Lubro Moly MO2 Transmission Friction Treatment, 50g [More Info] | |
| $8.25 | |
| Lubro Moly Oil Sludge Remover. Extended oil change intervals, small oil volumes, inadequate fuel quality, lean burning engines with their higher nitrogen oxide levels, tend to cause the formation of sludge in the engine. The sludge clogs oil screens, oil filters and oil passages. The supply is interrupted. Engine damage results. Öl-Schlamm-Spülung cleans the engine. Keeps oil screens and oil passages clean and free. Reduces deposits in the piston ring grooves. Prevents oil starvation and protects against engine damage. |
|
PEL-LM5200 | Lubro Moly Oil Sludge Remover [More Info] | No Longer Available | |
| Lubro Moly Leak Stopper.Puts an end to the environment-polluting oil spots on the streets, driveways and garages. Öl-Verlust-Stop regenerates engine seals and reduces the oil consumption over the piston rings (by maintaining the viscosity) and over the valve guides (by regenerating the seals). Prevents blue exhaust smoke. Compensates for viscosity loss and reduces engine noise. |
|
PEL-LM1005 | Lubro Moly Leak Stopper [More Info] | No Longer Available | |
| Lubro Moly Viscosity Stabilizer.Reduces oil consumption. Keeps the oil viscosity stable. For constant oil pressure. Visco-Stabil offers outstanding protection against the shearing of the motor oil even under the hardest operating conditions. Prevents oil thinning with frequent cold starts. Through better sealing of movable engine parts oil consumption is reduced. Therefore especially recommended for older, high mileage cars. Reduces hydraulic lifter noise. |
|
PEL-LM1017 | Lubro Moly Viscosity Stabilizer [More Info] | No Longer Available | |
| Swepco Motor Oil Additives |
| Swepco brand lubricants are the world's most technologically advanced lubricants, with exacting formulations specifically designed for harsh industrial environments. Because Swepco lubricants are specially formulated for commercial equipment operating in the most severe service conditions, our lubricants also provide outstanding performance for automotive and racing use. Turn to Swepco for lubrication solutions for the most demanding automotive applications. For more information, see the Swepco USA Website. |
|
| Swepco 502 Oil Improver. An engine oil improver designed to improve and fortify any crankcase oil's performance in gasoline or diesel engines. Special solvent eliminates sticking and clattering of hydraulic valve lifters. Contains friction modifiers, Micronized Moly, and a complex blend of additives. Neutralizes acid, dissolves gum and varnish formations. Protects engines against friction, reduces heat and wear. Helps eliminate sticking valve lifters and reduces hydraulic lifter noise. Reduces oil consumption and Extends engine life. |
|
PEL-SWP502 | Swepco 502 Oil Improver [More Info] | $12.15 | |
| Swepco 505 Oil Additive. Swepco 505 is an oil improver designed for use in both gasoline and diesel engines to eliminate friction, wear and to improve fuel efficiency. Contains DIMONYL and organic Moly which plates all vital metal surfaces with a friction reducing film. Highly effective as an anti-oxidant additive. Increases chemical and thermal stability of any oil. Protects expensive turbochargers. Reduces friction and engine wear which lowers operating temperatures and improves the fuel efficiency of the engine. Superior protection for turbo chargers. Improves high temperature performance of engine oils and extends engine life. |
|
PEL-SWP505 | Swepco 505 Oil Additive [More Info] | $20.85 | |
