| Porsche 911 Engine Miscellaneous - Page 7 |
Tools |
| Pulley Wrench Tools |
| Need to tighten that loose fan Belt? don't use a screwdriver to hold the pulley - get the correct tool for the job! Keep in mind that correct fan belt attachment is essential to keep your engine running cool. It is nearly impossible to obtain the correct tension on the fan belt pulley without this tool. Before you purchase one from us though, make sure that you check the factory tool kit that came with the car - there should be one in there. Important Tip: The pulley and fan belt must use six shims at all times, either on the inside or the outside. Make sure that you place the extra shims on the outside. If you don't, then the nut will bottom out and the fan belt will not tighten properly, no matter how hard you try. |
|
PEL-TOL-P209 | Alternator Pulley Wrench, 911 (1975-89) [More Info] | $32.70 |  |
PEL-TOL-P208 | 911 Fan Pulley Wrench, 911 (1965-74)
Brand: SIR Tools [More Info] | $27.70 | |
PEL-PW-FPW | 911 Fan Pulley Wrench, 911 (1965-74)
Brand: Wilding Engineering [More Info] | $28.00 | |
| Allen Head Tools |
| Removing your 911 heads or heat exchangers can be very difficult without the correct tools for the job. With these extra long Allen extensions, those nuts can't hide. The 10mm tool is used for removing and tightening the head studs on the 911 motor. The 8mm tool is used to remove and tighten the 911 heat exchanger nuts. |
|
PEL-TOL-A10MM | Allen Head Nut Removal Tool for 911 Head Studs (10mm) [More Info] | $44.99 | |
PEL-TOL-P243 | Allen Heat Exchanger Nut Removal Tool (8mm) [More Info] | $29.40 | |
| 911 Jack Pad |
| Jack your Porsche up with a Floor jack and use our Jack Pad to protect the underside of your car. Particularly with the 911, the jack pad provides a safe location for you to place your jack under, without the fear of damaging any delicate oil or A/C lines. A must for every 911, 914 and 356 owner! Made from steel and cadmium plated for rust resistance. |
|
10-6641-030-M230 | Steel Jack Pad, 911/911 Turbo (through 1989) [More Info] |  |
| $19.00 | |
| Magnetic Box "V" Wrench (17mm) |
| This unique-looking tool is used to aid in the removal of the engine/transmission bolts. The V-Wrench holds the nut on the other side of the engine compartment so that you can remove the nut from the transmission. The V design holds the nut steady, unlike a normal wrench, and allows you to remove the bolt on the other side without the help of an assistant. |
|
PEL-TOL-P222 | Magnetic Box "V" Wrench (17mm) [More Info] | $31.00 | |
| Spanner Wrench Set |
| This four piece spanner wrench set includes the sizes 27mm, 30mm, 32mm, 36mm, and is most useful for various repairs on your car. |
|
PEL-TOL-P242 | Spanner 4 Wrench Set, 911, 930, 914-6, 944, 968 (27mm, 30mm, 32mm, 36mm) [More Info] | $60.50 | |
| Clutch Alignment Tool |
| The clutch alignment tool is used to orient the clutch disc with respect to the flywheel when mounting your pressure plate. You may have tremendous difficulty remating the transmission and the engine if the disc is misaligned with the pressure plate upon assembly. |
|
PEL-TOL-CA2 | Clutch Alignment Tool (Spline count = 20; Pilot diameter = 14.9 mm; Spline diameter = 22.2 mm), 911 (1972-98) [More Info] | $8.85 | |
| Flare Nut Wrench Set |
| Use the right tool for the job, whether it's replacing or tightening a solid fuel line or even changing out your fuel filter and check valve. Made from SK's high polish SuperKrome finish, that protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance |
|
TOL-SK376 | 6 Piece SuperKrome Metric Flare Nut Wrench Set [More Info] | $94.30 | |
TOL-SK378 | 6 Piece SuperKrome Metric 15 degree Offset Flare Nut Wrench Set [More Info] | $94.37 | |
