| Porsche 911 Engine Miscellaneous - Page 6 |
Tools |
| Top Dead Center Indicator |
| To ensure the utmost in timing precision, the true TDC of all engines should be checked to confirm the accuracy of the pulley TDC mark in relation to real TDC. This tool screws into the spark plug hole and gives you a mechanical indication where the piston is in relation to the pulley. |
|
STOMSKI-SR022 | Stomski Racing Top Dead Center Indicator, 14mm, each, 911 (1965-98) [More Info] | $82.00 |  |
| Cylinder Holding Tool |
PEL-PP903044 | Porsche 911 Cylinder Holding Tool (sold per each, 6 required), 911 (1965-98) [More Info] | $7.95 | |
STOMSKI-SR007 | Stomski Racing Cylinder Hold-down Nut Set (six included), 911 (1965-98) [More Info] | $42.00 | |
| Leakdown/Compression Gauge Adapter |
| You no longer need to fight or snake a flexible rubber hose into the cylinder head to hook up a compression or leak down gauge. Simply insert this unique tool into the cylinder head and attach your gauge. Precisely machined from high quality stainless steel. |
|
STOMSKI-SR031 | Stomski Racing Leakdown/Compression Gauge Adapter, 14mm, each, 911 (1965-98) [More Info] | $62.00 | |
| Valve Spring Tools |
| Replacing your valves? Make quick work of this job with our specialized tool, designed specifically for the 911. The tool mounts to one of the studs on the heads and compresses the spring so that the valve keepers may be removed. Tools are specifically designed for either intake or exhaust valves. |
|
PEL-TOL-P7E | Valve Spring Compressor, Exhaust, 911 (1965-89) [More Info] | $59.60 | |
PEL-TOL-P71 | Valve Spring Compressor, Intake, 911 (1965-89) [More Info] | $59.60 | |
PEL-TOL-P228 | Spring Loaded Gauge (displays valve spring height), 911 [More Info] | $50.40 | |
| 911 Valve Adjustment Tool |
| Adjusting your 911'S valves? Make quick work of this job with our specialized tool, designed specifically for the air cooled engine. Valve Adjusting Tool allows for view of the adjustment screw as you tighten the locking nut. |
|
PEL-TOL-P213 | Feeler Gauge, .004 inches [More Info] | $5.40 | |
PEL-TOL-B10MM | Feeler Gauge blades, .004 inches, set of 3 [More Info] | $6.40 | |
PEL-TOL-B15MM | Feeler Gauge blades, .006 inches, set of 3 [More Info] | No Longer Available | |
| Designed for 13mm jam nut valve adjustment screws on air-cooled motors, this 2-in-1 Professional Valve Adjustment Tool's unique window allows you to view the screwdriver blade's position, holding the adjustment screw as the jam nut is tightened. This visual contact and control over the screwdriver allows quicker, more accurate valve adjustment times. Made of heat-treated chrome vanadium steel with soft-grip handle. |
|
PEL-UN120-8895 | 13mm Jam Nut Valve Adjustment Tool [More Info] | $44.95 | |
| Valve Adjustment Tool with Loop Handle |
| This tool is inspired by a classic version that hasn't been available for awhile. The feeler gauge stock is stored in the loop handle and is pulled out as needed. At the tip, expose as much feeler stock as you need and bend it to whatever angle the job requires. The tool is made of stainless steel and the brass clasp slides up and down the tool, tightening and loosening the grip on the stock. The tool includes one 12" piece of .004 feeler stock. Additional stock is sold separately. |
|
PEL-LM-VALVE | Valve Adjustment Tool, with 12-inch .004 feeler gauge stock stored in loop [More Info] | $37.00 | |
PEL-LM-004 | Feeler Stock .004 (12 inches) [More Info] | $5.50 | |
