| Porsche 911 Brake Pads & Rotors - Page 3 |
High Performance Drilled Brake Rotors  |
| Looking for added performance? Looking to improve the 'feel' and cooling of your stock 911 brakes? These rotors are cross-drilled for improved brake cooling and better brake performance. Cross drilling of rotors is standard on the 911 Turbo and Porsche factory race cars. The cross drilling allows water to escape on wet days, and also funnels air through the brake system, allowing for better cooling. |
|
| 477-405-083A-M867 | Front Brake Rotor, Vented (with Coat Z corrosion protection) (2 per car, sold individually) 911E/911L/911S (1967-69), 911 (1970-73), Each Brand: Zimmermann Cross-drilled [More Info] |  |
| $87.25 |  |
| 901-352-041-14-M867 | Rear Brake Rotor, Vented (2 per car, sold individually) 911E/911S (1969), 911 (1970-73), Each Brand: Zimmermann Coat-Z Cross-drilled [More Info] |  |
| $118.75 |  |
Cooling Kits |
These brake cooling kits funnel air directly to the front rotors. Additionally, each part of the kit is available separately in case you need a replacement or are interested in assembling a custom cooling solution.
The N.E.R.P Cooling Kit features:• Aluminum brake backing plate and associated components have been specifically designed to fit your model. No cutting, drilling, machining. • Light weight, 5-7 oz. Typical per plate. • Flow bench Designed for maximum efficiency. • All high quality components in each kit, from 100% SS hose clamps to 500° F Silicone duct hose. • Left and Right Backing Plates can be swapped to allow top front hose entry. NOTE: May interfere with stock sway bars |
|
 PEL-PBSCBPAZK | 911 Front Brake Cooling Complete Kit, 911 (1969-89, with 3.5" bolt spacing, S or A calipers) [More Info] | $295.99 |  |
 PEL-PBSCBPAZL | 911 Backing Plate, Black Anodized (Left), 911 (1969-89, with 3.5" bolt spacing, S or A calipers), 5.7oz [More Info] | $120.00 |  |
 PEL-PBSCBPAZR | 911 Backing Plate, Black Anodized (Right), 911 (1969-89, with 3.5" bolt spacing, S or A calipers), 5.7oz [More Info] | $120.00 |  |
 PEL-PBSTBPAZL | 911 Backing Plate (Double), Black Anodized (Left), 911 (1969-89, with 3.5" bolt spacing, S or A calipers), 7.2oz [More Info] | $135.00 |  |
| PEL-PBSTBPAZR | 911 Backing Plate (Double), Black Anodized (Right), 911 (1969-89, with 3.5" bolt spacing, S or A calipers), 7.2oz [More Info] | $135.00 |  |
 PEL-MNOOFSOZN | Debris Screen, for 2.5-inch Diameter Hose [More Info] | $15.60 |  |
 PEL-MOOOCHOZN | Silicone Hose 2.5" X 14.5", 500 deg F [More Info] | $11.95 |  |
| PEL-MOOOBHOZN | Silicone Hose 2.5" (Bulk Hose, Priced per each 11-feet), 500 deg F [More Info] | $92.85 |  |
 PEL-MAOOSCOZN | Polyethylene Scoop, for 2.5-inch Hose Diameter [More Info] | $40.00 |  |
 PEL-MOOOSCPKN | Scoop for 2.5-inch or 3-inch Hose Diameter [More Info] | $16.50 |  |
Protective Plates |
 901-351-801-17-OEM | Front Brake Protective Plate, 911 (1969-89), Each Brand: Genuine Porsche [More Info] | $41.00 |  |
Emergency Brake Shoes & Parts |
| Tired of chasing your car down the street after the emergency brake let go? Are years of having the previous owner accidentally drive the first 100 yards with it engaged taking their toll? Replace your brake shoes with high-quality rebuilt ones. Need to know how adjust your parking brake? Refer to our Pelican Technical Article on E-Brake Shoe Adjustment. Also, replace some important springs and other small parts while you're working on your rear brake assembly. Shoes are sold individually - a total of four are required to completely rebuild both emergency brake assemblies. When you're in there tinkering around with the E-brake shoes, make sure that you replace your retaining and tensioning springs as well. |
|
| 901-352-906-13-OEM | Emergency Brake Shoe, 911 (1965-68), 4 required per car, sold individually Brand: Genuine Porsche [More Info] | No Longer Available | |
| 911-352-097-10-M49 | Emergency Brake Shoe (4 required per car, sold individually), 911 (1965-89), 912 Brand: Jurid [More Info] |  |
| $39.75 |  |
 911-352-098-00-OEM | E-Brake Adjustment Screw and Nut, 911/911 Turbo (1965-94) Brand: Genuine Porsche [More Info] | $18.25 |  |
 911-352-944-00-OEM | E-Brake Adjustment Screw Bushing, 911/911 Turbo (1965-94) each Brand: Genuine Porsche [More Info] | No Longer Available | |
 901-352-932-10-OEM | E-Brake Single Coil Return Spring, 911/911 Turbo (1965-94) each Brand: Genuine Porsche [More Info] | $7.50 |  |
 901-352-954-10-OEM | E-Brake Double Coil Return Spring, 911/911 Turbo (1965-89) each Brand: Genuine Porsche [More Info] | $6.25 |  |
 901-352-957-10-OEM | E-Brake Conical Retaining Spring, 911/911 Turbo (1965-89) each Brand: Genuine Porsche [More Info] | $4.75 |  |
 901-352-955-10-OEM | E-Brake Conical Retaining Spring Washer, 911/911 Turbo (1965-89) each Brand: Genuine Porsche [More Info] | $4.75 |  |
 901-352-959-11-OEM | E-Brake Conical Retaining Spring Pin, 911/911 Turbo (1965-89) each Brand: Genuine Porsche [More Info] | $5.50 |  |
 911-352-090-00-OEM | E-Brake Expander, 911 (1965-89) each Brand: Genuine Porsche [More Info] | $10.75 |  |
 901-352-953-10-OEM | E-Brake Expander Spring, 911 (1965-89) each Brand: Genuine Porsche [More Info] | $3.75 |  |
 911-352-801-20-OEM | Brake Rotor Dust Shield, 911 (1969-89), each Brand: Genuine Porsche [More Info] | No Longer Available | |
| 901-424-551-15-OEM | 911 Handbrake Cable (1965-68) (2 per car, sold individually) each Brand: Gemo [More Info] | $101.25 |  |
| 911-424-551-03-M74 | 911 Handbrake Cable (1969-89) (2 per car, sold individually) each Brand: Gemo [More Info] |  |
| $22.50 |  |