| Porsche 911 & 912 Filters & Belts - Page 2 |
Fuel Filters |
| Keep your injection system clean by changing your fuel filter every 6000 miles. 1973 Cars may require later update kit. |
|
311-133-511-D-M67 | Fuel Filter, For Cars With Carburetors, 911 (1965-1971), Each
Brand: Mahle Filter [Photo] [Photo] |  |
| $10.00 |  |
0-450-904-058-M14 | Fuel Filter, Inline Plastic with 6/8 mm Inlet and 6/8 mm Outlet, 912 with Solex (1965-69)
Brand: Bosch [Photo] | |
| $1.25 | |
PCG-110-909-10-M260 | Fuel Filter (Bosch 0 450 905 002), For Cars With MFI Systems, 911 (1969-73), Each
Brand: OEM [Photo] | |
| $66.00 | |
C-110-184-00 | Fuel Filter (Bosch 0 450 903 056), For CIS Systems With Original Filter, 911 (1973 1/2), Each
Brand: Genuine Porsche [Photo] | No Longer Available | |
911-110-176-02-M14 | Fuel Filter (Bosch 0-045-905-016), For CIS Systems With Updated Filter, 911 (1973 1/2), Each
Brand: Bosch [Photo] | |
| $15.00 | |
| 911-356-901-00-OEM | Fuel Filter Update Kit For Cars with CIS, 911 (1973 1/2), Each | No Longer Available | |
Swepco 201 Transmission Fluid |
| This stuff is the industry standard for keeping your manual transmission alive and kicking. Some owners will swear that their transmission shifts better when it's loaded with Swepco 201. No additives are needed - they're all in there, including a new super-duper, space-age, low-fat, high fiber additive called Lubium that forms a protective film on the internal components. And, if that isn't enough, it's this really cool blue color too! |
|
| SWE-201-80W90 | Swepco 201 Transmission Fluid, 1 gallon | $49.25 | |
SL4344 | Fluid Oil Pump - Fits most 1/2 gallon, and gallon bottles. NOT FOR USE WITH BRAKE FLUID! [Photo] | $8.45 | |
Valve Cover Gasket Kits |
| These gaskets should be replaced every time that you adjust your valves. The gasket kits come complete with valve cover gaskets and enough nylock nuts and crush washers for all 4 valve covers. Buy an extra pair or two to have on hand for next time you adjust your valves! |
|
930-105-194-04-M17 | Valve Cover Gasket, Upper, 2 Per Car, 911 (1965-68), Each
Brand: Victor Reinz [Photo] | |
| $6.00 | |
901-105-195-03-M17 | Valve Cover Gasket, Lower, 2 Per Car, 911 (1965-68), Each
Brand: Victor Reinz [Photo] | |
| $7.50 | |
10-0906-091-M260 | Valve Cover Gasket Kit Complete With Cover Nuts & Washers, 911 (1968-89)
Brand: OEM [Photo] | |
| $25.25 | |
10-0906-092-M260 | Valve Cover Gasket Kit With Silicon Bead On Lower Gaskets, 911 (1968-89)
Brand: OEM [Photo] | |
| $38.00 | |
930-101-391-01-M17 | Oil Strainer/Sump Plate Gasket, 2 Per Car, 911 (1965-73), Each
Brand: Victor Reinz [Photo] | |
| $5.00 | |
| Silicone Valve Cover Gaskets |
Silicone Valve Cover gaskets for your 911! They are a tad thicker than ones you replace every time you adjust your valves and can get rid of those troublesome leaks. These can be reused again and again; just rinse them off and put them back on.
We do recommend you replace the Nylock nuts each time you remove the valve covers, but that applies to any valve cover gasket. |
|
PEL-SIL-VLGK | Silicone Valve Cover Gasket Set, 4 Per Set, hardware not included, 911 (1968-73) [Photo] | $48.70 | |
900-084-004-02-M58 | Valve Cover Nut, 8mm Nylock, All Early 911 (34 Per Car), Each
Brand: OEM [Photo] | |
| $0.25 | |
900-031-014-30-M131 | Washer, 8.4mm, All Early 911 (34 Per Car), Each
Brand: Fischer & Plath [Photo] | |
| $0.50 | |
900-123-118-30-M131 | Oil Drain Plug Seal (22 X 27mm) for Plug at Bottom of Engine Sump Plate or Oil Tank (sold per each, 2 required), 911 and 911 Turbo (1965-89)
Brand: Fischer & Plath [Photo] | |
| $0.50 | |
