| Porsche 356 Tools - Page 6 |
Extraction Tools |
| Nothing beats the frustration of trying to remove something that isn't going anywhere. Do the job right by using the right tools to remove that gear or bushing. These pullers are designed to properly remove what they were designed to remove, without damaging anything else. |
|
PEL-TOL-P229 | Distributor Drive Gear Puller, 912, 914, 356 [More Info] | $25.20 |  |
PEL-TOL-P236 | Oil Piston Pressure Relief Valve Puller, 912, 914, 356 [More Info] | $27.70 | |
PEL-TOL-P239 | Starter Bushing Puller, 12V [More Info] | $31.00 | |
PEL-TOL-P238 | Starter Bushing Puller, 6V [More Info] | $31.00 | |
Spanner Wrench Set |
| This four piece spanner wrench set includes the sizes 27mm, 30mm, 32mm, 36mm, and is most useful for various repairs on your car. |
|
PEL-TOL-P242 | Spanner 4 Wrench Set, 911, 930, 914-6, 944, 968 (27mm, 30mm, 32mm, 36mm) [More Info] | $60.50 | |
36 MM Oil Line Wrench |
| Having trouble removing the large oil lines on your Porsche? Then this is the wrench for you. Precision laser cut 36MM wrench with sculpted handle for maximum grip on the fitting and in your hand. 12 point design will not slip off or round fittings like open-end wrenches do. 15 degree head design allows wrench to operate in the tight confines of the engine compartment. If you own a Porsche 911, 930, 914-6, you'll need this wrench. |
|
PEL-PW-OLW | 36 MM Oil Line Wrench [More Info] | $31.95 | |
Clutch Alignment Tool  |
| The clutch alignment tool is used to orient the clutch disc with respect to the flywheel when mounting your pressure plate. You may have tremendous difficulty remating the transmission and the engine if the disc is misaligned with the pressure plate upon assembly. |
|
PEL-TOL-CA1 | Clutch Alignment Tool (Spline count = 24; Pilot diameter = 14.7 mm; Spline diameter = 20.6 mm), 356 All, 911 (1965-71), 912/912E, 914 All, 924 (1976-82) [More Info] | $8.85 | |
Custom Service Cover |
| These durable covers are made from 25 oz., double stitched, 100% virgin vinyl and lined with an Extra thick, super soft, porous flannel backing to protect your paint from dents and abrasions. The cover is felt bound around the edges and hand tailored for maximum fit and strength. A handy pocket is conveniently sewn into the cover to hold your tools for quick access. All covers come with a 5 Year Limited Warranty, the Best in the industry, against manufacturers defects. |
|
| PEL-COLSC001 | Custom Rear Service Cover (1pc w/Pocket), 356 All [More Info] | $95.00 | |
Stud Removal Tools |
| This tool incorporates a collet that latches onto and compresses the threads of the stud, squeezing them tight. Then the tool and the stud can be removed. If you are removing studs from an engine case, an extra vise-grip or two might be useful as well to get more torque on the studs. |
|
PEL-SNAPON-CG500-2 | Stud Remover Collet Tool [More Info] | $93.75 | |
PEL-SNAPON-CG500-43 | Stud Remover Collet, M10x1.5 [More Info] | $45.45 | |
| PEL-SNAPON-CG500-37 | Stud Remover Collet, M8x1.25 [More Info] | $45.45 | |
Dremel Variable Speed Rotary Tool Kit |
This variable speed (5,000 - 35,000 rpm) tool comes with 24 accessories for polishing, cutting, sanding, grinding and more. Combining the correct speeds and bits, you can complete all kinds of tasks on a multitude of materials. Includes a molded case.
Manufacturer: DREMEL
Click here to visit the manufacturer's home page |
|
TOL-DRE300-124 | Dremel Variable Speed Rotary Tool Kit [More Info] | $98.00 | |
