|  | | | Porsche 356 Pistons, Cylinders, and Heads - Page 1 | Piston and Cylinder Kits | | When doing a rebuild, it is recommended you replace the pistons and cylinders, assuring proper compression and ring seating. |
| 
990174912-M232 | Piston and Cylinder Set (86mm Big Bore, 1750cc), 356C (1964-65)
Brand: AA [More Info] |  |
| $782.50 |  | 
616-103-904-04-SET | Piston and Cylinder Set (sold only in sets of 4) (82.5mm, 9.3:1, Nikasil), 356C/356SC (1964-65)
Brand: Mahle [More Info] | $2862.00 | | 
616-103-906-01-SET | Piston and Cylinder Set (sold only in sets of 4) (82.5mm, 8.6:1, Cast Iron, 356A/B/C/356SC (1950-65)
Brand: Mahle [More Info] | $1487.00 | | LN Engineering's Nickies Cylinders  | LN Engineering's Nickies cylinders look great and perform even better. They are machined out of a specially extruded alloy that is up to 50% stronger, 45% more thermally conductive, and much less brittle than the alloys used by Mahle for cast factory cylinders. With 6.5 fins per inch versus the typical 4 fins per inch on cast cylinders, a phenomenal 60% increase of surface area is achieved providing improved heat transfer. Nickel-silicon-carbide (known as Nikasil), which has a reputation for providing hundreds of thousands of miles of worry-free service, adheres excellently to this alloy, giving top-notch reliability. The finished product is media blasted and acid etched to roughen the surface, further increasing cooling ability by increasing air turbulence. All of these improvements and they weigh less too! Why go back to factory when you can build a cooler-running and more durable engine instead!
NOTE: ARP or RACEWARE high-strength head studs are strongly recommended for use with Nickies. Pistons and hardware sold separately. Most orders are custom built and will take 6-8 weeks for delivery. For more information about Nickies, visit the manufacturer here. |
| | LN-102-825 | LN Engineering Nickies Cylinders, set of 4, 82.5mm, 356, 912 (1965-69) [More Info] | $2049.00 | | | LN-102-83 | LN Engineering Nickies Cylinders, set of 4, 83mm, 356, 912 (1965-69) [More Info] | $2049.00 | | | LN-102-835 | LN Engineering Nickies Cylinders, set of 4, 83.5mm, 356, 912 (1965-69) [More Info] | $2049.00 | | | LN-102-86SF | LN Engineering Nickies Cylinders, set of 4, 86mm, slip fit, 356, 912 (1965-69) [More Info] | $2049.00 | | | LN-102-86U | LN Engineering Nickies Cylinders, set of 4, 86mm, machine-in, 356, 912 (1965-69) [More Info] | $2049.00 | | | LN-102-88 | LN Engineering Nickies Cylinders, set of 4, 88mm, machine-in, 356, 912 (1965-69) [More Info] | $2049.00 | | | LN-102-88U | LN Engineering Nickies Cylinders, set of 4, 88mm, machine-in, (using registers of 102-90), 356, 912 (1965-69) [More Info] | $2049.00 | | | LN-102-90 | LN Engineering Nickies Cylinders, set of 4, 90mm, machine-in, 356, 912 (1965-69) [More Info] | $2049.00 | | Head Gasket Set | | Plan on getting a set of these gaskets for your project. We offer both a top-end set and a bottom end set for your convenience. Note: See Main Engine Components for bottom end set. |
| 
616-100-184-03-M17 | Engine Cylinder Head Gasket Set, 356 A/B/C (1950-65)
Brand: Victor Reinz [More Info] | |
| $55.50 | | 356 Intake Valves | | Whether you use the original OEM valves or aftermarket stainless steel ones, you will get plenty of life and miles out of new valves on a rebuild. Make sure that you check the valve dimensions on used intake valves. |
| 
616-105-402-00-M154 | Intake Valve (sold per each, 4 required), 356C (1964-65)
Brand: Intervalves [More Info] | |
| $26.00 | | 
546-05-203-M403 | Intake Valve (sold per each, 4 required), 356A/B (1956-63), Exc. Super 90
Brand: AE [More Info] | |
| $17.50 | | 356 Exhaust Valves | | Whether you use the original OEM valves or aftermarket stainless steel ones, you will get plenty of life and miles out of new valves on a rebuild. Make sure that you check the valve dimensions on used exhaust valves. |
| 
616-105-405-50-M403 | Exhaust Valve (sold per each, 4 required), 356A/B (1956-63), Exc. Super 90
Brand: AE [More Info] | |
| $23.00 | | 
616-105-406-50-M154 | Exhaust Valve (sold per each, 4 required), 356C (1964-65)
Brand: Intervalves [More Info] | |
| $47.50 | |
| |
|
|
|
