|  | | | Porsche 356 Brake Hydraulics - Page 3 | Caliper Parts | | Always check for rust or pitting on parts when doing a caliper rebuild. It's also a good idea to flush and replace brake fluid at least once a year. Each kit contains piston seals, boots, retainers and pin clips for one caliper. Pistons are not included. |
| | Caliper Repair Kits | | When doing a caliper rebuild, it's a good idea to replace any internal parts that are pitted or rusted. |
| | 901-351-964-11-M4 | Caliper Repair Kit, Front (piston not included), 2 required 356C (1963-65), Each
Brand: Ate [More Info] |  |
| $15.50 |  | | 901-352-964-11-M4 | Caliper Repair Kit, Rear (piston not included), 2 required 356C (1963-65), Each
Brand: Ate [More Info] | |
| $12.50 | | | Caliper Pistons can be fairly prone to pitting and rusting. If yours happen to be in this condition, it's a good idea to replace them with new ones |
| | NLA-351-097-10 | Caliper Piston, Stainless Steel, Front, 4 required 356C (1963-65), Each [More Info] | $58.95 | | | NLA-352-099-00 | Caliper Piston, Stainless Steel, Rear, 4 required 356C (1963-65), Each [More Info] | $28.80 | | | 695-351-641-90-M33 | Bleeder Valve with Rubber Cap (Front and Rear), 8 required 356C (1963-65), Each
Brand: FTE [More Info] | |
| $4.50 | | | Caliper Parts | | Sometimes, there are little caliper pieces that are not normally included in a rebuild kit. We can provide you with the parts you need for that rebuild. |
| | 901-351-913-14-OEM | Retaining Pin, Front pads, 4 required 356C (1963-65), Each
Brand: Genuine Porsche [More Info] | No Longer Available | | | NLA-352-938-11 | Retaining Pin, Rear Pads, 4 required 356C (1963-65), Each [More Info] | $3.70 | | | 901-351-955-10-OEM | Safety Clip, Front and Rear, 8 required 356C (1963-65), Each
Brand: Genuine Porsche [More Info] | $2.25 | | | 901-351-916-12-OEM | Expanding Spring, Front, 2 required 356C (1963-65), Each
Brand: Genuine Porsche [More Info] | $11.75 | | | 901-352-936-10-OEM | Expanding Spring, Rear, 2 required 356C (1963-65), Each
Brand: Genuine Porsche [More Info] | $18.50 | | | 900-067-058-01-OEM | Tie Bolt for Front Caliper (4 per car, sold individually), 356C (1963-65), Each
Brand: Genuine Porsche [More Info] | No Longer Available | | | N-044-703-2-OEM | Banjo Bolt (4 per car, sold individually), 356C (1963-65), Each
Brand: Genuine Porsche [More Info] | $1.25 | | | 900-123-005-20-M131 | Copper Gasket (12x16mm), 4 required, 356C (1963-65), Each
Brand: Fischer & Plath [More Info] | |
| $0.25 | | 
N-013-808-3-OEM | Copper Gasket, Rear (10x16mm) 2 required 356c (1963-65), Each
Brand: Genuine Porsche [More Info] | $0.75 | | | 901-351-956-10-OEM | Copper Gasket, Front (10x16mm) 2 required 356c (1963-65), Each
Brand: Genuine Porsche [More Info] | No Longer Available | | | 914-355-531-00-OEM | Banjo Ring, Rear, 2 required, 356C (1963-65), Each
Brand: Genuine Porsche [More Info] | $19.00 | | | 695-351-532-00-OEM | Banjo Ring, Front, 2 required, 356C (1963-65), Each
Brand: Genuine Porsche [More Info] | $16.50 | | 
999-215-027-02-OEM | Banjo Ring, Front, 2 required, 356, 356A, 356B (1950-63) Each
Brand: Genuine Porsche [More Info] | $20.75 | |
| |
|
|
|
