| Porsche 356 Brake Hydraulics - Page 2 |
Master Cylinders |
|
| Master Cylinders |
| 356-42-020-M33 | Master Cylinder (does NOT include reservoir or brake light switch), 356B (1960-63)
Brand: FTE-FAG [Photo] |  |
| $111.00 |  |
| PEL-356-42-020 | Master Cylinder (includes reservoir and brake light switch), 356B (1960-63)
Brand: Ate | $182.35 | |
| 695-355-011-00-M4 | Master Cylinder (with brake light switch), 356C (1964-65)
Brand: Ate [Photo] [Photo] | |
| $166.75 | |
| Master Cylinder Rebuild Kit |
| 695-355-930-01-OEM | Master Cylinder Rebuild Kit, 356C/SC w/Disc Brakes (1963-65)
Brand: Genuine Porsche | No Longer Available | |
Brake Light Switch |
901-613-401-00-OEM | Brake Warning/Stop Light Switch, 356B/C
Brand: Genuine Porsche [Photo] | $21.00 | |
Wheel Cylinders |
| Are you losing brake strength? Got a puddle of brake fluid under your tires? The problem could be your Wheel Cylinders. A Wheel Cylinder works the same way as a hydraulic jack; if there are any leaks, it will not operate correctly. Replace old leaky or frozen units with new ones. |
|
| Front Wheel Cylinders |
| 695-351-511-00-M4 | Front Wheel Cylinder, Complete, Upper Left and Lower Right, 356B (1960-62), Each
Brand: Ate [Photo] [Photo] | |
| $215.75 | |
| 695-351-512-00-M4 | Front Wheel Cylinder, Complete, Upper Right and Lower Left, 356B (1960-62), Each
Brand: Ate [Photo] [Photo] | |
| $186.50 | |
| Rear Wheel Cylinders |
| 644-352-513-01-M4 | Rear Wheel Cylinder, Complete, Left and Right, 356B (1960-62), Each
Brand: Ate [Photo] [Photo] | |
| $146.25 | |
| Wheel Cylinder Kits |
| 113-698-273 | Wheel Cylinder Kit (one kit required per wheel), 356A/356B (1955-63), Each | $9.70 | |
| 644-351-912-00-M33 | Repair Kit for Wheel Cylinder (1 required for each front cylinder, 2 required for each rear cylinder), 356 (through 1963), Each
Brand: FTE-FAG [Photo] | |
| $16.00 | |
Caliper Parts |
| Always check for rust or pitting on parts when doing a caliper rebuild. It's also a good idea to flush and replace brake fluid at least once a year. Each kit contains piston seals, boots, retainers and pin clips for one caliper. Pistons are not included. |
|
| Caliper Repair Kits |
| When doing a caliper rebuild, it's a good idea to replace any internal parts that are pitted or rusted. |
|
| 901-351-964-11-M4 | Caliper Repair Kit, Front, (piston not included), 2 required 356C (1963-65), Each
Brand: Ate [Photo] | |
| $15.00 | |
| 901-352-964-11-M4 | Caliper Repair Kit, Rear, (piston not included), 2 required 356C (1963-65), Each
Brand: Ate [Photo] | |
| $14.75 | |
| Caliper Pistons can be fairly prone to pitting and rusting. If yours happen to be in this condition, it's a good idea to replace them with new ones |
|
| NLA-351-097-10 | Caliper Piston, Stainless Steel, Front, 4 required 356C (1963-65), Each | $58.95 | |
| NLA-352-099-00 | Caliper Piston, Stainless Steel, Rear, 4 required 356C (1963-65), Each | $28.80 | |
| 695-351-641-90-M33 | Bleeder Valve with Rubber Cap (Front and Rear), 8 required 356C (1963-65), Each
Brand: FTE-FAG | |
| $5.25 | |
