Brake squeal got you down? Try these inserts between your pad and your caliper. Our pad inserts should help to dampen the brake pads when you begin to brake, thus reducing the vibrations that cause squealing. The anti-squeal pads attach to the brake pad, and dampen the vibrations as the pad is pressed against the rotor. A set of eight is required for all four corners of the car.
Anti-Squeal Pad Inserts, Set of four, Two sets required for all four brakes, BMW E30 3 Series, All (1984-92) [More Info]
No Longer Available
Wurth Anti-Squeal Products
Wurth Copper Paste is a 98% pure copper metallic Anti-Squeal/Seize lubricant sealant compound for all threaded parts and gaskets. CU 1100 is a high temperature stable lubricant up to 2000°F. Non-gumming. Seals out moisture. Will not run out of threads when heated. Sticks to metal threads and lets joints in pipes, nuts on bolts, or studs join with less torque. D.O.T. Non-Hazardous. Comes in 1 lb. can with built-in brush.
Wurth CU 1800 Extreme Pressure Lubricant, 1 lb [More Info]
No Longer Available
Wurth Anti Squeal Spray eliminates disc brake squeal. Dries in minutes with permanent effect. Brake Pads must be removed to apply. Contents: 300 ml.
Most BMW's are equipped with handy brake pad wear sensors that detect when the pads are worn down. Make sure that your sensors are working properly so that you don't damage your rotors, or create unsafe driving conditions. It's cheap insurance against brake failures. NOTE: These sensors are quite fragile and require care during installation. Some performance brake pads do not have provisions for wear sensors like original pads do.
Brake Pad Sensor, Front, 318i (1984-85), 318i/is/ic M42 eng (1991-92), 325e/es/i/is/iC (1984-91), 325ix (1987-90) Brand: PEX [More Info]
Rear Brake Pad Sensors
Brake Pad Sensor, Rear, 318i/is/ic M42 eng (1991-92), 325e/es/i/is/iC (1984-91), 325ix (1987-90) Brand: PEX [More Info]
Brake Pad Sensor, Front/Rear, M3 (1987-91) Brand: PEX [More Info]