Pelican Parts
Parts Catalog Accessories Catalog How To Articles Pelican Tech Forums
Call Pelican Parts at 888-280-7799
 
- Back to Catalog -
Porsche 986 Boxster (1997-04)
Wheel Bearings
Rear Wheel Bearing Extractor and Installer Kit
Porsche 987 Boxster (2005-08)
Wheel Bearings
Rear Wheel Bearing Extractor and Installer Kit
- Back to Catalog -
Home >  Porsche CatalogBoxster (1997-04) >   Project 40: Wheel Bearings   
Project 40: Wheel Bearings - Page 1
The Pelican site has never had a good wheel bearing replacement article until now. Wayne took special care to document all aspects of wheel bearing replacement, and the principles are applicable to almost any car.
   Click here to read the entire article on Project 40!

Porsche 986 Boxster (1997-04)

Wheel Bearings
Wheel bearings are one of the parts that routinely wear out. With the car off the ground, check the wheel for any wobbling or excessive noise. Replace bearings in pairs. Tech Tip: Freeze the bearings prior to installation. The cold temperatures will make them shrink slightly and be easier to press in. They also make a nice snack when served with ice cream.
Manufacturer: SKF or FAG - Porsche OEM Suppliers
Wheel Bearing, Boxster Front/Rear (1997-04) Boxster S Front only (2000-04), Each
999-053-041-04-M92

Wheel Bearing, Boxster Front/Rear (1997-04) Boxster S Front only (2000-04), Each
   Brand: SKF    [More Info]

No Longer Available 

999-053-041-04-M34

Wheel Bearing, Boxster Front/Rear (1997-04) Boxster S Front only (2000-04), Each
   Brand: FAG  Original Equipment Manufacturer at the time of the vehicle's assembly    [More Info]

$38.75


999-053-054-06-M34

Rear Wheel Bearing (2 per car, sold individually) Boxster S (2000-04), Each
   Brand: FAG  Original Equipment Manufacturer at the time of the vehicle's assembly    [More Info]

$53.75
Rear Wheel Bearing Extractor and Installer Kit
If you want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one Porsche kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The kit comes with a set of adapters specific to the 911 series, but can also be used on all front and rear wheel drive vehicles with independent suspension. The tool eliminates the need for such drastic measures such as a slide hammer or flame torch to remove the rear wheel bearing. The tool facilitates the installation and removal of the rear bearings, and makes the whole job 1000% easier.

PEL-TOL-SIRB90-P2

Rear Hub/Bearing Extractor and Installer Kit    [More Info]

$387.95

Porsche 987 Boxster (2005-08)

Wheel Bearings
Wheel bearings are one of the parts that routinely wear out. With the car off the ground, check the wheel for any wobbling or excessive noise. Replace bearings in pairs. Tech Tip: Freeze the bearings prior to installation. The cold temperatures will make them shrink slightly and be easier to press in. They also make a nice snack when served with ice cream.
Manufacturer: SKF or FAG - Porsche OEM Suppliers

999-053-054-06-M34

Wheel Bearing, Front/Rear (4 per car, sold individually), Boxster/Boxster S (2005-08), Each
   Brand: FAG  Original Equipment Manufacturer at the time of the vehicle's assembly    [More Info]

$53.75
Rear Wheel Bearing Extractor and Installer Kit
If you want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one Porsche kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The kit comes with a set of adapters specific to the 911 series, but can also be used on all front and rear wheel drive vehicles with independent suspension. The tool eliminates the need for such drastic measures such as a slide hammer or flame torch to remove the rear wheel bearing. The tool facilitates the installation and removal of the rear bearings, and makes the whole job 1000% easier.

PEL-TOL-SIRB90-P2

Rear Hub/Bearing Extractor and Installer Kit    [More Info]

$387.95

  Page 1 of 1  1

 

        


QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers
Copyright 2016 Pelican Parts Inc.
DMCA Registered Agent Contact Page

Page last updated: Fri 11/24/2017 12:02:15 AM