Parts Catalog Accessories Catalog Tech Info Tech Forums
 
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
 
- Back to Catalog -
Porsche 911 (1965-73)
Struts And Shock Absorbers
Front Bilstein Strut Inserts
Rear Bilstein Shock Absorbers
Complete Bilstein Strut Assemblies
Front Koni Strut Inserts
Rear Koni Shock Absorbers
Front Boge/Sachs Strut Inserts
Rear Boge/Sachs Shock Absorber
Front KYB Strut Inserts
Rear KYB Shock Absorbers
Shock Absorber Mounting Hardware
Poly-Graphite Front Upper Strut Mount Kit
Elephant Racing Strut Top Rubber Bushings
Von Shocks Struts, Shocks, and Coilover Systems
Rebel S Racing (RSR) Products Front Coil Over Kit
Rebel S Racing (RSR) Products Rear Coil Over Kit
Porsche 911 (1974-89)
Shock Absorbers & Struts
Bilstein Shocks & Struts
Bilstein Sport Struts
Bilstein Strut Assemblies
Racing Strut Assemblies
Koni Shocks & Struts
Koni Strut Assemblies
Boge/Sachs Shocks & Struts
Boge Strut Assemblies
KYB Shocks & Struts
Shock Absorber Mounting Hardware
Poly-Graphite Front Upper Strut Mount Kit
Elephant Racing Strut Top Rubber Bushings
Von Shocks Struts, Shocks, and Coilover Systems
Rebel S Racing (RSR) Products Front Coil Over Kit
Rebel S Racing (RSR) Products Rear Coil Over Kit
- Back to Catalog -
Home >  911 Catalog >      
- Page 6

Shock Absorber Mounting Hardware

Elephant Racing Strut Top Rubber Bushings
A true rubber replacement bushing for the factory strut top camber plates. "Sport" hardness rubber compound improves performance by reducing deflection under load, while maintaining the ride characteristics of rubber.

ERMP-2290001

Elephant Racing Strut Top Camber Plate Bushing Kit, One Kit Per Car, 911/911 Turbo (1966-89), 914 all    [More Info]

$189.20
Von Shocks Struts, Shocks, and Coilover Systems
Von Shocks, a division of Elephant Racing, is dedicated to developing high performance shocks and shock systems. Even the best commercial shock brands build their shocks to within certain tolerances, sometimes as high as +/- 15%. This means that by luck of the draw, a pair of shocks can have identical damping specifications, or they may differ by as much as 30%. That might be OK for minivans, but not for high-performance street and race cars. Von Shocks are hand-built and tested on their computer shock dyno. These shocks are pair-matched for consistency and each matched pair is serialized and delivered with the dyno sheets for the actual pair you receive.

  
Click here to see the Von Shocks page and select the correct system for your car!
Rebel S Racing (RSR) Products Front Coil Over Kit
The Rebel S Racing (RSR) Products Front Coil Over Kit enables you to convert your Bilstein strut housings to coil overs! It can be used to replace torsion bars or work with them.

Allows ride height to be adjusted with ease.
2.25" ID Coil springs (NOT included) allow for spring rates greater than what is available in torsion bar sizes.
Progressive or Tender/Main spring combinations can be used resulting in a modern comfortable yet very well handling ride.
Upper spring hat features our proprietary design sealed thrust bearing which proves to be the cleanest solution in steering/spring rotation. Allows for maximum camber adjustments to be made.
Square threaded design is stronger and more resistant to dings, dirt, and binding associated with the traditional Bilstein RSR struts. Square threads actually lock the spring perch in place under load, this is backed up by a nylon tipped set screw for extra security.
Shortened seal caps allow for 19mm more suspension travel.
All components are anodized for great durability and appearance.
Fits all 911, 930, 912, 914 with Bilstein front strut housings

Kit includes: (2) T6-6061 Square Threaded Tubes (2) Upper Spring Hats with Sealed Thrust Bearings (2) Adj. Lower Spring Perches (2) Weld-on rings (2) Shortened Seal Saps with new seals installed.

NOTE: Springs and Bilstein Struts are NOT included. Use with 2.25" ID Coil springs - Eibach or Hyperco recommended.

RSR-FCOIL911

Rebel S Racing (RSR) Products Front Coil Over Kit (Springs and Struts NOT included), 911/911 Turbo (1965-89)    [More Info]

$350.00
Rebel S Racing (RSR) Products Rear Coil Over Kit
Install springs onto your Bilstein Sport shocks with the Rebel S Racing (RSR) Products 911 Rear Coil Over Kit! It can be used to replace torsion bars or work with them.

Allows ride height to be adjusted with ease.
2.25" ID Coil springs (NOT included) allow for spring rates greater than what is available in torsion bar sizes.
Progressive or Tender/Main spring combinations can be used resulting in a modern comfortable yet very well handling ride.
Square threaded design is stronger and more resistant to dings, dirt, and binding associated with the traditional Bilstein RSR struts. Square threads actually lock the spring perch in place under load, this is backed up by a nylon tipped set screw for extra security.
Designed specifically for the rear of the 911, 930, and 912.
All components are anodized for great durability and appearance.

NOTE: Springs and Bilstein Shocks are NOT included. Use with 2.25" ID Coil springs - Eibach or Hyperco recommended.

Kit includes: T6-6061 Threaded Sleeves, Upper Spring Hats, Adj. Lower Spring Perches, Additional flat washers and snap rings)

RSR-RCOIL911

Rebel S Racing (RSR) Products Rear Coil Over Kit (Springs and Struts NOT included), 911/911 Turbo (1972-89)    [More Info]

$300.00

  Page 6 of 6  <123456

 

        

  Search our site:    

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping] [Careers]

Copyright Pelican Parts Inc. -    DMCA Registered Agent Contact Page


Page last updated: Tue 12/6/2016 12:01:21 AM