Parts Catalog Accessories Catalog Tech Info Tech Forums
 
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
 
- Back to Catalog -
Porsche 911 (1965-73)
Brake Pads
Genuine Porsche Brake Pads
Brake Pads
Hawk Performance Brake Pads
Metal-Master Brake Pads
BHP Performance Brake Pads
Pagid Racing Brake Pads
Brake Pad Retainer Kits
Anti-Squeal Products
Porsche 911 (1974-89)
Brake Pads
Genuine Porsche Brake Pads
Brake Pads
Hawk Performance Brake Pads
Metal-Master Brake Pads
BHP Performance Brake Pads
Cool Carbon Performance Brake Pads
Pagid Racing Brake Pads
Brake Pad Retainer Kits
Brake Pad Sensors
- Back to Catalog -
Home >  911 Catalog >    
- Page 2

Porsche 911 (1965-73)

Metal-Master Brake Pads
Metal-Master brake pads are a popular replacement for the OEM brakes. If you are unhappy with the OEM pads for reasons of brake noise or too much brake dust, then try replacing them with the Metal-Master pads.
PEL-D141RM

Front Brake Pad Set, For Steel "M" Caliper, 911/912 (1965-73)
   Brand: Metal-Master     [More Info]

No Longer Available 
PEL-D141RM

Rear Brake Pad Set, 911/912 (1969-73)
   Brand: Metal-Master     [More Info]

No Longer Available 
BHP Performance Brake Pads
Introducing the XPS line of brake pads from BHP a true dual-use performance pad applicable for either street or track usage. The practicality of these pads is due to the advanced XPS composite that provides for a high initial bite and maintains a near linear torque curve. Cold and elevated operating temperature performance is only within a 5% range, giving a predictable pedal feel and consistent stopping distances. See the test results for yourself!

The proprietary XPS formulation is a high friction composite with relatively low metallic content. This results in a lower thermal conductivity, which in turn, minimizes overheating of the brake fluid. The XPS formulation is also less destructive to brake discs in severe use, and is more tolerant to cross-drilling of discs than semi-metallic pads.

Brake noise is minimized with an anti-noise shim made from an advanced composite. These composite shims have proven to be the most effective shims available in dampening high frequency vibrations associated with brake squeal. The pads are finished with a Dupont silicone powder-coat that accommodates temperatures of up to 800 F without degradation. Not only does this preserve its finished appearance, but also prevents corrosion of the backing plates throughout the whole life of the pad.

NOTE: It is recommended that these pads should be used with either freshly turned or brand new brake rotors to minimize the possibility of brake noise.

BHP-S0910

BHP Performance Brake Pad Set - M Caliper, FRONT - 911 (1969-73)    [More Info]

No Longer Available 

BHP-S0910

BHP Performance Brake Pad Set - M Caliper, REAR - 911 (1969-89)    [More Info]

No Longer Available 
Pagid Racing Brake Pads
The Pagid Orange RS 4-4 compound has a very good fade resistance and a higher average friction value than the RS 4-2 (Blue). It is rotor friendly with predictable, non-aggressive friction behavior (stable torque). Fading resistance up to 560C (1.050F). It is a very good rear compound for Touring Car applications in combination with RS 14 front pads. Its main application is Porsche 911 racing. It is used on either Short Track or Long Distance; also for front and rear axles. It is also used on BMW Showroom Stock, all other Touring-Cars and Single-Seater up to F3.

99-5541-541-M473

Pagid Orange RS 4-4 Front Brake Pad Set, Aluminum Alloy 'S' Caliper, 911 (1969-77)
   Brand: Pagid Racing    [More Info]

$222.00

99-5541-539-M473

Pagid Orange RS 4-4 Rear Brake Pad Set, 911 (1969-89)
   Brand: Pagid Racing    [More Info]

$201.75
Brake Pad Retainer Kits
Missing a spring clip to hold in your brake pads? Want to replace your worn or cracked pad retaining clips? These kits contain the following: Brake Pad Retainer Clips, Brake Pad Retainer Pins, Pad Tensioner Spring Clips and contain enough parts for both left and right calipers.

911-352-951-00-M4

Brake Pad Retainer Kit, 'M' Caliper, Front, 911 (1965-68)
   Brand: Ate    [More Info]

$30.00
911-351-951-02-OEM

Brake Pad Retainer Kit, For Steel "M" Caliper, Front, 911 (1969-73)
   Brand: Genuine Porsche    [More Info]

No Longer Available 

911-352-951-00-M4

Brake Pad Retainer Kit, 'M' Caliper, Rear, 911 (1969-83)
   Brand: Ate    [More Info]

$30.00
Anti-Squeal Products
Brake squeal got you down? Try these inserts between your pad and your caliper. The pad inserts should help to dampen the brake pads when you begin to brake, thus reducing vibrations that cause squealing.

Wurth Anti-Squeal Products
Copper Paste is a 98% pure copper metallic Anti-Squeal/Seize lubricant sealant compound for all threaded parts and gaskets. CU 1100 is a high temperature stable lubricant up to 2000F. Non-gumming. Seals out moisture. Will not run out of threads when heated. Sticks to metal threads and lets joints in pipes, nuts on bolts, or studs join with less torque. D.O.T. Non-Hazardous. Comes in 1 lb. can with built-in brush.

Wurth Anti Squeal Spray
Anti Squeal Spray eliminates disc brake squeal. Dries in minutes with permanent effect. Brake Pads must be removed to apply. Contents: 300 ml.

BR-AS-004

Anti-Squeal Pad Inserts, Set of four, Two sets required for all four brakes.    [More Info]

No Longer Available 

WRTH-0893180016

Wurth CU 1800 Extreme Pressure Lubricant, 1 lb    [More Info]

$28.75

WRTH-890106

Wurth Anti Squeal Spray, 300 ml    [More Info]

$19.99

Porsche 911 (1974-89)

  Page 2 of 6  <123456>

        

  Search our site:    

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping] [Careers]

Copyright Pelican Parts Inc. -    DMCA Registered Agent Contact Page


Page last updated: Sat 12/3/2016 12:01:05 AM