Parts Catalog Accessories Catalog Tech Info Tech Forums
 
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
 
- Back to Catalog -
Porsche 911 (1968-77)
Turbo Valve Covers
Hargett Precision Billet Aluminum Valve Covers
Valve Cover Gasket Kits
Silicone Valve Cover Gaskets
Valve Cover Hardware
- Back to Catalog -
Home >  911 Catalog >      
- Page 1

Porsche 911 (1968-77)

Turbo Valve Covers
The original valve covers are infamous for leaking around the gasket seals. This is because the magnesium has a different coefficient of thermal expansion than the aluminum heads. The result is a gap that develops when hot, along with a leak. Fix the problem on both the lower and upper set by installing a set of aluminum turbo valve covers. On the 914-6, the lower ones need to be machined slightly in order to get them off of the heads when the engine is installed in the car. When installing, you also need new valve cover gaskets. Our gasket kit contains the complete set of new gaskets, washers and nuts for all four covers.
901-105-115-03-M260

Turbo Valve Cover, Upper (2 per car, sold individually) 911 (1968-73)
   Brand: OEM    [More Info]

$270.75
930-105-116-05-OEM

Turbo Valve Cover, Lower (2 per car, sold individually) 911 (1968-73)
   Brand: Genuine Porsche    [More Info]

$130.50
PEL-9146-0015N

Turbo Valve Cover Set, 2 Upper and 2 Lower, 911 (1968-73), 914-6 (1970-72)    [More Info]

$774.00
Hargett Precision Billet Aluminum Valve Covers
Hargett Precision has a new solution to an old problem: leaking valve covers. The paper gasket material on the original valve covers is prone to leaking, whether the covers are warped or not. These ribbed, billet aluminum valve covers use the 964/993 rubber gaskets. The result: no more leaks! They not only look good, these covers are thick and strong -- and are designed to be the last set of lower covers you'll need to purchase. Be sure not to forget the gaskets!
Lower covers sets and upper cover sets are sold separately. Hardware not included.

HG-VC911L

Billet Aluminum Valve Covers, Lower, fits all 911 (1968-1989), Set of two Lower, gaskets not included    [More Info]

$331.25

964-105-135-01-M17

964 Valve Cover Gasket, Lower (2 per car, sold individually) 911 Carrera 2/4 (1989-94)
   Brand: Victor Reinz    [More Info]

$9.00
HG-VC911L-TP

Billet Aluminum Valve Covers, Lower - Drilled for Twin Plug, fits all 911 (1968-1989), Set of two Lower, gaskets not included    [More Info]

$331.25

HG-VC911U

Billet Aluminum Valve Covers, Upper, fits all 911 (1968-1989), Set of two Upper, gaskets not included    [More Info]

$331.25
Valve Cover Gasket Kits
These gaskets should be replaced every time that you adjust your valves. The gasket kits come complete with valve cover gaskets and enough nylock nuts and crush washers for all 4 valve covers. Buy an extra pair or two to have on hand for next time you adjust your valves!

930-105-194-04-M17

Valve Cover Gasket, Upper (2 per car, sold individually) 911 (1965-89)
   Brand: Victor Reinz  Original Equipment Manufacturer at the time of the vehicle's assembly    [More Info]

$4.50

901-105-195-03-M17

Valve Cover Gasket, Lower (2 per car, sold individually) 911 (1965-67)
   Brand: Victor Reinz    [More Info]

$4.00

10-0906-091-M260

Valve Cover Gasket Kit Complete With Cover Nuts & Washers, 911 (1968-89)
   Brand: OEM    [More Info]

$22.00

10-0906-092-M260

Valve Cover Gasket Kit With Silicon Bead On Lower Gaskets, 911 (1968-89)
   Brand: OEM    [More Info]

$32.00

930-101-391-01-M17

Oil Strainer/Sump Plate Gasket (2 per car, sold individually) 911 (1965-73)
   Brand: Victor Reinz  Original Equipment Manufacturer at the time of the vehicle's assembly    [More Info]

$3.50
Silicone Valve Cover Gaskets
Silicone Valve Cover gaskets for your 911! They are a tad thicker than ones you replace every time you adjust your valves and can get rid of those troublesome leaks. These can be reused again and again; just rinse them off and put them back on.

We do recommend you replace the Nylock nuts each time you remove the valve covers, but that applies to any valve cover gasket.

APBZ-SVCG-E

Silicone Valve Cover Gasket Set, 4 Per Set, hardware not included, 911 (1965 - early 1967)    [More Info]

$46.75

PEL-SIL-VLGK

Silicone Valve Cover Gasket Set, 4 Per Set, hardware not included, 911 (1968-89)     [More Info]

$51.25
Valve Cover Hardware

900-084-004-03-M58

Valve Cover Nut, 8mm Nylock, All Early 911 (34 per car, sold individually)
   Brand: OEM    [More Info]

$0.50

900-031-014-30-M131

Washer, 8.4mm, All Early 911 (34 per car, sold individually)
   Brand: Fischer & Plath    [More Info]

$0.25

  Page 1 of 1  1

 

        

  Search our site:    

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping] [Careers]

Copyright Pelican Parts Inc. -    DMCA Registered Agent Contact Page


Page last updated: Sat 12/3/2016 12:00:35 AM