- Superior Value for Outdoor Protection
Mosom™ is a three layer material. The outer layers are
Spunbond Polyropylene, and the middle layer is a special micro-porus film.
The middle film layer is an excellent rain barrier, while allowing for
vapors to pass through. It is a great choice for all-round car cover use,
suggested for most conditions except extreme sun, snow or ice - in which
case we suggest
Stormproof. Mosom is a non-woven material, so in the unlikely event a
rip occurs in the material, it will not run.
car covers are very breathable, almost as breathable as
If your vehicle is exposed to rain for long durations, Mosom™ or
are both excellent choices. If protection from light nicks, scratches and
light hail is required, Coverbond 4 is the best choice.
Mosom™ is soft to the touch and won't scratch a vehicle finish (assuming
the vehicle is clean when the cover is applied). Mosom™ is available in
gray color, and offered with optional embroidery and officially
are other materials on the market which have the same basic construction -
a micro-porus film layer laminated to two layers of Spunbond Polypropylen.
Coverking developed Mosom™ in-house specifically for use as a car cover
material, and has added the highest levels of U.V. inhibitors - which
prevent degredation in sunny climates. Coverking tests all it's materials,
including Mosom™, to be compatible with automotive paints and clear coats.
Because Coverking is
TS16949 and QS-9000 certified, all materials used for Custom Car
Covers are tested and OEM approved.
revolutionary new material takes the stretch of Coverking Satin Stretch™
custom covers, and combines it with all weather protection. A middle layer
of Thermoplastic Polyurethane (TPU) provides your
vehicle with the best water resistance available from a Custom Car Cover
today. Two outer layers of woven polyester reinforce and protect the inner
layer while allowing moderate breathability. Protect your vehicle from the
elements while keeping a perfect fit!
Mosom Custom Car Covers are
manufactured with Coverking's famous
Custom Fit and the unique pattern designs which result in the fewest seams
possible - Compare the images on the left. In an effort to save material,
some car cover manufactures use patterns which are “chopped up” into small
pieces, and sewn together creating a patchwork effect. This method saves
more than 20% of total material use, but results in car covers which look
like patchwork quilts – seams everywhere. By having extra seams, risks of
seam failures and seam leakage increase. In addition, the car cover looses
it’s custom look and resembles a universal cover. Coverking has never
compromised the function or fit of it’s Custom Car Covers to save a few
yards of fabric.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.