Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
Volkswagen Touareg (2004 - 2010)
Volkswagen Home > Volkswagen Touareg (2004 - 2010) > EngineOil Circulation 

Oil Circulation - Page 1

Oil Filters and Housings
Pelican Parts highly recommends using OEM filters and cartridges in your vehicle whenever possible. Oil filters clean impurities from the engine oil. Change your oil filter every time you change your oil.
Oil Filter Tools
Special socket utilizes old timing belt to act as an oil filter remover.
Oil Filter Remover
- Touareg Sport Utility (2005-09)
- Touareg TDI Sport Utility (2004, 2006-10)
- Touareg V6 and Touareg V8 Sport Utility (2004)
- Touareg VR6 Sport Utility (2010)
    [More Info]
Part Number: BM-AS6050

Socket type filter remover for spin on oil filters and filter housings. Reinforced construction and side lock bolts to remove the most stubborn filters.
Oil Filter Removal Socket, 74mm 3/8" drive
- Touareg Sport Utility (2005-09)
- Touareg TDI Sport Utility (2004, 2006-10)
- Touareg V6 and Touareg V8 Sport Utility (2004)
- Touareg VR6 Sport Utility (2010)
    [More Info]
 (2 customer reviews)
  Note: Not for use on diesel models.
Part Number: BM-ST3045
Motor Oil
Motor oil is the single most important element in keeping your engine healthy and helping it to enjoy a long life. Pelican recommends changing your synthetic motor oil every 5000 miles and 3000 for dino oil. Always replace your filter when changing your oil. Different engines and climates require specific oil viscosities. Be sure to refer to your owner's manual for the type and viscosity of oil required for your car.
Red Line 10w40 Synthetic Motor Oil, Quart
    [More Info]
Part Number: PEL-11404
Oil Drain Pans
It's wise to purchase a drain pan that errs on the side of being too big - the last thing you'll want to see is oil rolling over the sides of the container onto your garage floor.
This container can hold up to 15 quarts and includes a very tight lid that allows the pan to double as a storage container. Simply empty your oil, then stand it upright, and carry it off to your local recycling center. It really couldn't be any simpler.
Super Oil Drain Pan, 15 quart with Cover
    [More Info]
 (2 customer reviews)
Part Number: PEL-PP801095
New Pig Form-A-Funnel, 9" x 4.75"
    [More Info]
Part Number: PEL-PIG18509
New Pig Form-A-Funnel, 14.5" x 6.5"
    [More Info]
 (1 customer review)
Part Number: PEL-PIG18609

Straight out of the "Why didn't I think of that?" bin comes the Form-A-Funnel from New Pig. Divert oil around engine parts and right into your drain pan for guaranteed no-mess oil changes! The Form-A-Funnel Draining Tool bends, molds and holds any shape so you can customize the perfect channel to drain liquids without making a mess. The Form-A-Funnel features a thick, pliable nitrile rubber coating that completely encases a thin, bendable layer of aluminum alloy; reshape and reuse thousands of times without fazing it. Highly compatible nitrile rubber ensures safe handling when used with common vehicle liquids and chemicals; works in temperatures from -30deg F to 425deg F. The Form-A-Funnel cleans easily with a wet rag and is compatible with most cleaners and degreasers. You can even store it flat or roll it up.
New Pig Form-A-Funnel, 29" x 5"
    [More Info]
Part Number: PEL-PIG18611
New Pig Form-A-Funnel, 22" x 8.6"
    [More Info]
 (1 customer review)
Part Number: PEL-PIG18714

This Flex-tube Spout attaches to most containers and allows you to accurately position the mouth of the tube exactly where you want it to be located. Two thread sizes to fit most containers. Screws on to motor oil, antifreeze, windshield washer fluid, and similar plastic containers. Complete with stopper cap and hang tab.
Plastic Flex Spout
    [More Info]
Part Number: PLE-60-200
Oil Flushes and Additives
Swepco 502 Oil Improver. An engine oil improver designed to improve and fortify any crankcase oil's performance in gasoline or diesel engines. Special solvent eliminates sticking and clattering of hydraulic valve lifters. Contains friction modifiers, Micronized Moly, and a complex blend of additives. Neutralizes acid, dissolves gum and varnish formations. Protects engines against friction, reduces heat and wear. Helps eliminate sticking valve lifters and reduces hydraulic lifter noise. Reduces oil consumption and Extends engine life.
Swepco 502 Oil Improver
    [More Info]
 (4 customer reviews)
Part Number: PEL-SWP502

Swepco 505 Oil Additive. Swepco 505 is an oil improver designed for use in both gasoline and diesel engines to eliminate friction, wear and to improve fuel efficiency. Contains DIMONYL and organic Moly which plates all vital metal surfaces with a friction reducing film. Highly effective as an anti-oxidant additive. Increases chemical and thermal stability of any oil. Protects expensive turbochargers. Reduces friction and engine wear which lowers operating temperatures and improves the fuel efficiency of the engine. Superior protection for turbo chargers. Improves high temperature performance of engine oils and extends engine life.
Swepco 505 Oil Additive
    [More Info]
 (2 customer reviews)
Part Number: PEL-SWP505
No Longer Available

Volkswagen Home  >  Volkswagen Touareg (2004 - 2010) > Engine  >  Oil Circulation 

  Page 1 of 1  1

  Search our site:    
   Cart  | Project List | Order Status | Help    

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright 2012, Pelican Parts Inc. -    DMCA Registered Agent Contact Page

Page last updated: Wed 10/22/2014 10:21:39 PM