Here at Pelican we offer head gasket sets for your vehicles. Whenever you remove the head, always replace the head gasket and have the head surfaced to ensure proper sealing between the head and the engine block.
Head Gasket (0.70 mm)
X3 2.5i Sport Utility (2004-05) X3 3.0i Sport Utility (2004-06)
In this section you will find the gaskets that seal the intake manifold to the cylinder head. Replace them whenever you remove any intake components. Good intake gaskets are crucial for proper running of your car. If you have leaks, it can cause the car to run improperly, and possibly cause engine damage. Also included are the gaskets that seal the exhaust manifolds to the cylinder head. Replace them whenever you remove any exhaust components. Keeping your exhaust components sealed is vital to keep your car running correctly.
A critical part of any head rebuild is new OEM intake and exhaust valves. Many times valves can be reground and reused, however if your valves are too worn to be re-used, Pelican can supply you with the needed parts for your rebuild. Valve Guides act to provide valves with proper lubrication while your engine is running. Any head rebuild should include new Valve Guides. Whenever you replace the valve guides, be sure to check the size of the original valve guide before ordering.