Parts Catalog Accessories Catalog Tech Info Tech Forums
 
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
Audi 80, 90 (1988-1991)
 
Audi Home > Audi 80, 90 (1988-1991) > Suspension & SteeringAxles, Bearings & Differential 

Axles, Bearings & Differential - Page 1

CV Joint Grease
Remember to lube and pack your CV joints when you replace them. Pelican carries both the LubroMoly and the Swepco 101 grease for complete lubrication of your joints. Both are very good and very slippery. Each contains enough grease to effectively one CV joint from completely dry.
Swepco CV Joint Grease, enough for four joints, 14.4 oz
    [More Info]
 
    
 (8 customer reviews)
Part Number: SWE-101
$11.29
Wheel Spacers
Many wheels are not a direct fit with big brake kits or coilover suspensions. A wheel spacer helps by moving the wheel away from the caliper, wheel spokes, or suspension that is causing the clearance issue. If your wheels have the wrong offset (too high an offset, causing the wheels to be too far inward) a set of wheel spacers can correct this by pushing the wheel out to the correct offset.
H&R TRAK+ Wheel Spacers
When it comes to all-out cornering performance, one rule applies: wider is really, truly better. H&R TRAK+ wheel spacers let you balance the handling and performance of your car to suit your aggressive driving style, and without spending the time, money and trouble of springing for bigger wheels and tires. Most manufacturers leave 20 to 30mm of extra space between the wheels and the fenders, to suit arcane regulations or to leave space for flapping tire chains. These light-alloy spacers push your existing wheels or even your hot, aftermarket alloys out to fill the wheelwells properly, giving you better cornering, better aerodynamics and even better looks.

DR Series (6-40mm Track Widening)
This spacer is fitted between the wheel and hub, using longer wheel bolts (ordered separately). Please check type of bolt head (taper or round and diameter) and shaft length before ordering.

DRA Series (6-60mm Track Widening)
This Spacer is fitted to the hub with special wheel bolts and has new threaded holes for existing wheel bolts.

NOTE: ALL DRA kits come complete with all necessary wheel bolts, studs and nuts to mount the adapter to your original hub. These will be used in connection with the existing parts fitted to the vehicle.
H&R TRAK+ 5mm Hub-Centric Wheel Spacer Pair, Bolt Pattern 4:108mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separatley)
- 90 Sedan (1989-91)
    [More Info]
 
    
 
  Note: 3mm and 5mm spacers use 28mm, stock length bolts; These spacers are hub-centric flat disc type spacers which do not have a hub-centric lip and require the factory hub to center the wheels. Please measure to verify you will have enough hub to fit the wheel after installing.
Part Number: HR-10234571
$47.00
H&R TRAK+ 5mm Hub-Centric Wheel Spacer Pair, Black, Bolt Pattern 4:108mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separately)
- 90 Sedan (1989-91)
    [More Info]
 
    
 
  Note: 3mm and 5mm spacers use 28mm, stock length bolts; These spacers are hub-centric flat disc type spacers which do not have a hub-centric lip and require the factory hub to center the wheels. Please measure to verify you will have enough hub to fit the wheel after installing.
Part Number: HR-10234571-SW
$47.00
H&R TRAK+ 8mm Hub-Centric Wheel Spacer Pair, Bolt Pattern 5:100mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separately)
- 90 Sedan (1989-91)
    [More Info]
 
    
 
  Note: 8mm and 10mm spacers use 35mm long bolts; These spacers are hub-centric flat disc type spacers which do not have a hub-centric lip and require the factory hub to center the wheels. Please measure to verify you will have enough hub to fit the wheel after installing.
Part Number: HR-16234571
$55.75
H&R TRAK+ 8mm Hub-Centric Wheel Spacer Pair, Black, Bolt Pattern 4x108mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separately)
- 90 Sedan (1989-91)
    [More Info]
 
    
 
  Note: 8mm and 10mm spacers use 35mm long bolts; These spacers are hub-centric flat disc type spacers which do not have a hub-centric lip and require the factory hub to center the wheels. Please measure to verify you will have enough hub to fit the wheel after installing.
Part Number: HR-16234571-SW
$55.75
H&R TRAK+ 15mm Hub-Centric Wheel Spacer Pair, Bolt Pattern 4:108mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separately)
- 90 Sedan (1989-91)
    [More Info]
 
    
 
  Note: 15mm spacers use 45mm long bolts
Part Number: HR-30234571
$94.00
H&R TRAK+ 15mm Hub-Centric Wheel Spacer Pair, Black, Bolt Pattern 4:108mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separately)
- 90 Sedan (1989-91)
    [More Info]
 
    
 
  Note: 15mm spacers use 45mm long bolts
Part Number: HR-30234571-SW
$94.00
H&R TRAK+ 20mm Hub-Centric Wheel Spacer Pair, Bolt Pattern 4x108mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separately)
- 90 Sedan (1989-91)
    [More Info]
 
    
 (1 customer review)
  Note: 20mm spacers use 50mm long bolts
Part Number: HR-40234571
$94.00
H&R TRAK+ 20mm Hub-Centric Wheel Spacer Pair, Black, Bolt Pattern 4x108mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separately)
- 90 Sedan (1989-91)
    [More Info]
 
    
 
  Note: 20mm spacers use 50mm long bolts
Part Number: HR-40234571-SW
$94.00
H&R TRAK+ 25mm Hub-Centric Wheel Spacer Pair, Bolt Pattern 4:108mm, Center Bore 57.1mm, Thread Type 14x1.5, DRA Style
- 90 Sedan (1989-91)
    [More Info]
 
    
 
Part Number: HR-5034571
$141.75
H&R TRAK+ 3mm Hub-Centric Wheel Spacer Pair, Bolt Pattern 4:108mm, Center Bore 57.1mm, Thread Type 14x1.5, DR Style (bolts sold separately)
- 90 Sedan (1989-91)
    [More Info]
 
    
 
  Note: 3mm and 5mm spacers use 28mm, stock length bolts; These spacers are hub-centric flat disc type spacers which do not have a hub-centric lip and require the factory hub to center the wheels. Please measure to verify you will have enough hub to fit the wheel after installing.
Part Number: HR-6234571
$65.25
Wheel Bearing Grease
Remember to lube and pack your CV joints when you replace them. Pelican carries both the LubroMoly and the Swepco 101 grease for complete lubrication of your joints. Both are very good and very slippery. Each contains enough grease to effectively one CV joint from completely dry.
Swepco CV Joint Grease, enough for four joints, 14.4 oz
    [More Info]
 
    
 (8 customer reviews)
Part Number: SWE-101
$11.29

Audi Home  >  Audi 80, 90 (1988-1991) > Suspension & Steering  >  Axles, Bearings & Differential 

  Page 1 of 1  1



  Search our site:    
   Cart  | Project List | Order Status | Help    
 
Recommend this page to a friend...

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright 2012, Pelican Parts Inc. -    DMCA Registered Agent Contact Page

Page last updated: Wed 10/22/2014 10:08:50 PM