Parts Catalog Accessories Catalog Tech Info Tech Forums
 
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
Porsche Boxster (1997-2004)
 
Porsche Home > Porsche Boxster (1997-2004) > Suspension & SteeringSuspension, Shocks & Springs 

Suspension, Shocks & Springs - Page 5

Camber Plate Kits
  • Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing for increased front suspension rigidity, quicker steering response, and better handling.
  • Two sets of mounting holes allow for more than 1 deg of extra negative camber.
  • The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface.
  • The spherical bearing is securely clamped in place in the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which can result in annoying rattling and even possible failure.
  • Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction.
  • Fully compatible with all factory and aftermarket style upper spring seats.
Tarett Engineering Front Camber Plate Set
- Boxster (1997-04)
- Boxster S (2000-04)
- Boxster S Special Edition (2004)
    [More Info]
 
    
 
Part Number: TE-996FSMT
$450.00
Rennline Camber Plates
Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire's contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennline's sealed camber plates incorporate FK motorsports spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts. Comes as a set of two. Why are Rennline's strut mounts the best?
  • Drastically increased bearing life due to the integrated factory GT3 weather seals.
  • FK Motorsport Teflon-lined spherical bearings.
  • Rigid bearing mount, not clipped in like some products available.
  • Specially machined upper nut to allow clearance for maximum negative camber settings.
  • Allows for up to 1.25 degrees of added negative camber.
  • Special tool included to hold strut shaft from turning when tightening upper nut.
  • Can be used with all factory and aftermarket struts, Including factory non adjustable units.
  • Webbed machined base for light weight and superior strength.
  • Fully rebuildable
  • CNC machined 6061 anodized aluminum construction with stainless steel hardware.

    Note: When using factory non adjustable struts with factory spring seats, weather seal must be removed.
Installation Instructions
Rennline Sealed Front Camber Plate Set
- Boxster (1997-04)
- Boxster S (2000-04)
- Boxster S Special Edition (2004)
    [More Info]
 
    
 
Part Number: REN-S20
$475.00

Porsche Home  >  Porsche Boxster (1997-2004) > Suspension & Steering  >  Suspension, Shocks & Springs 

  Page 5 of 5  <12345



  Search our site:    
   Cart  | Project List | Order Status | Help    
 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright 2012, Pelican Parts Inc. -    DMCA Registered Agent Contact Page

Page last updated: Sun 10/26/2014 09:40:40 AM