Pelican Parts
Porsche Parts Catalog Accessories Catalog Porsche How To Articles Porsche Tech Forums
Call Pelican Parts at 888-280-7799
Porsche 914, 914-6 (1970-1976)
 
Porsche Home > Porsche 914, 914-6 (1970-1976) > Engine Cooling SystemHoses, Fans, and Clamps 

Hoses, Fans, and Clamps

- Page 1

Coolant / Antifreeze

If your car starts to run hot your coolant may be low or tired. Coolant or antifreeze is used to help dissipate the heat from the engine as it circulates through the block and Hoses, Fans, and Clamps. It is a non corrosive liquid that usually needs to be mixed with water. Radiator coolant levels should be checked frequently and changed according to the owner's manual.
Cooling System Additives
An excellent additive for cooling systems, Water Wetter reduces coolant temperatures by as much as 30 degrees Fahrenheit. It can be added to new or old antifreeze to improve heat transfer in your cooling system. Water Wetter also reduces scale buildup in cylinder heads for better cooling and keeps water pump seals lubricated for longer life. It also provides excellent corrosion protection for your cooling system. 12 oz.

Distilled Water

Distilled Water (1 Gallon)  
 
[ More Info ]

Note: Local municipal water is passed through a series of multimedia particulate and activated carbon filters. The water is then distilled in a vapor compression stream unit. All dissolved minerals are left behind as the water is vaporized and condensed in a stainless steel still. After filtration and ozonation, the water is promptly bottled.

Arrowhead
$4.25

Hose Clamps

These OE quality hose clamps are not like the average clamp found at your local parts store. Unlike the clamps with the slotted threads that may cut into your hoses, these have a smooth inner surface and are manufactured using a thicker stainless steel banding. Available in a variety of sizes, we've got enough hose clamps to fit practically any application.
Hose Clamp,  
 
[ More Info ]
- 914 4-cyl (1970-76)
- 914 6-cyl (1970-72)

Genuine Porsche
Brand Rating
$4.25

Stainless steel clamp secures support to strut housing and provides sturdy mounting of brake flex line to hard line junction. Highly recommended for use on coil over struts.

Hose Clamp Assortment Kit - 12 mm Width Spring Type  
[ More Info ]

Note: Contains: (Qty.) (25) 13.7-15.8 mm, (25) 16.3-18.5 mm, (25) 18.3-20.2 mm, (20) 22.3-24.7 mm, (10) 26-29.2 mm, (10) 31-34.5 mm, (10) 39-42.5 mm, (10) 47.5-52 mm, (1) Spring Hose Clamp Pliers.

Mubea
Brand Rating
$242.00
Hose Clamping Pliers Set - 3-Piece Set  
 
[ More Info ]

Note: Used to clamp flexible hoses, Contains: (Qty.) (1) Clamp for up-to 15 mm hoses, (1) Clamp for up-to 30 mm hoses, (1) Clamp for up-to 60 mm hoses.

Hazet
Brand Rating
$80.00
Hose Clamp Pliers  
 
[ More Info ]

Note: To remove and install three-ended spring type hose clamps, 177 mm length. 8 mm chuck minimum range. 18 mm clamping maximum range.

Hazet
Brand Rating
$72.50
Hose Clamp Pliers with Cable  
 
[ More Info ]

Note: To remove and install spring type hose clamps. Plastic, semi-flexable cable allows working without a guiding hand. Especially designed for use in confined spaces where direct use of pliers is not possible, 875 mm length. 7 mm minimum range. 60 mm maximum range.

Hazet
Brand Rating
$222.00
Hose Clamp Pliers with Cable  
 
[ More Info ]

Note: To remove and install spring type hose clamps with parallel ends. Reinforced cable enables application in areas with restricted access. Plastic coated handles for better gripping comfort. With toothed fixing device and one-hand operation. Fixing device is released by pressure lever, 875 mm length. 3 mm minimum range. 50 mm maximum range.

Hazet
Brand Rating
$181.25
Hose Clamp Pliers  
 
[ More Info ]

Note: To remove and install spring type hose clamps, 210 mm length. 6 mm chuck minimum range. 12 mm clamping maximum range.

Hazet
Brand Rating
$60.50
Hose Clamp Pliers  
 
[ More Info ]

Note: To remove and install 12 and 15 mm width spring type hose clamps. With movable safety jaws, 235 mm length.

Hazet
Brand Rating
$109.75
Porsche Home  >  Porsche 914, 914-6 (1970-1976) > Engine Cooling System  >  Hoses, Fans, and Clamps 

  Page 1 of 2  12>



Page last updated: Thu 9/21/2017 04:17:17 AM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window