Pelican Parts
Porsche Parts Catalog Accessories Catalog Porsche How To Articles Porsche Tech Forums
Call Pelican Parts at 888-280-7799
Porsche 914, 914-6 (1970-1976)
 
Porsche Home > Porsche 914, 914-6 (1970-1976) > EngineOil Circulation 

Oil Circulation

- Page 5

Oil Filler Caps and Pipes


Oil Cap O-Ring 914 4-cyl (1974-75)


Oil Filler Boot - Filler Tube to Oil Tank 914 6-cyl (1970-72)

Oil Level Sensors

Engine oil is stored in either a wet sump (bottom of engine) or dry sump (separate holding area away from engine). These sensors monitor and report the oil level. Don't count on these sensors for the life of your engine; make a habit of checking the level manually every third fill up.

Oil Coolers and Parts

Oil Coolers are essential for keeping temperature down in your engine. Over time, oil coolers can swell and expand due to heat. When doing a rebuild, we recommend you have the oil cooler flushed and pressure tested to verify any leaks or swelling.
Engine Oil Cooler 914 4-cyl (1970-76)

Core Height: 18.50" (470mm), Capacity: 1.30Qt (1.20L)

Core Height: 18.50" (470mm), Capacity: 1.30Qt (1.20L)


Using an electric fan can be helpful to increase air flow through a cooler mounted in a poor air flow location. We have 3 sizes (5.5", 6.5" and 7.5" diameter) in pusher and puller models available. They can be easily mounted to Mocal and most other oil cooling devices. These electric

Using an electric fan can be helpful to increase air flow through a cooler mounted in a poor air flow location. We have 3 sizes (5.5", 6.5" and 7.5" diameter) in pusher and puller models available. They can be easily mounted to Mocal and most other oil cooling devices. These electric fans are especially good for applications in very warm climates and heavy traffic commuting. Add a fan on the A/C condenser for better HVAC preformance too!

Using an electric fan can be helpful to increase air flow through a cooler mounted in a poor air flow location. We have 3 sizes (5.5", 6.5" and 7.5" diameter) in pusher and puller models available. They can be easily mounted to Mocal and most other oil cooling devices. These electric fans are especially good for applications in very warm climates and heavy traffic commuting. Add a fan on the A/C condenser for better HVAC preformance too!

Using an electric fan can be helpful to increase air flow through a cooler mounted in a poor air flow location. We have 3 sizes (5.5", 6.5" and 7.5" diameter) in pusher and puller models available. They can be easily mounted to Mocal and most other oil cooling devices. These electric fans are especially good for applications in very warm climates and heavy traffic commuting. Add a fan on the A/C condenser for better HVAC preformance too!

This kit includes all the necessary components for electric fan installation: adjustable thermal switch (160F - 210F) pre-wired sensor relay module, insulated wire & connectors, in-line fuse block w/30 amp fuse, power taps, and wiring schematic/instructions







Featuring a 9-Series 48-row cooler and high-volume low-profile 12V Spal fan.
Core Width: 14.25" (16" total), Core Height: 15.13" (15.48 total), Depth (including fan): 4.75", Fan: 12V, 1242 cfm

Using an electric fan can be helpful to increase air flow through a cooler mounted in a poor air flow location. We have 3 sizes (5.5", 6.5" and 7.5" diameter) in pusher and puller models available. They can be easily mounted to Mocal and most other oil cooling devices. These electric fans are especially good for applications in very warm climates and heavy traffic commuting. Add a fan on the A/C condenser for better HVAC preformance too!

Using an electric fan can be helpful to increase air flow through a cooler mounted in a poor air flow location. We have 3 sizes (5.5", 6.5" and 7.5" diameter) in pusher and puller models available. They can be easily mounted to Mocal and most other oil cooling devices. These electric fans are especially good for applications in very warm climates and heavy traffic commuting. Add a fan on the A/C condenser for better HVAC preformance too!

Oil Cooler Seal 914 4-cyl (1970-76)
Oil Cooler Seal  
 
[ More Info ]
- 914 4-cyl (1970-76)

  (2 per car, sold individually)

D P H
Brand Rating
$0.75
Oil Cooler Seal  
 
[ More Info ]
- 914 4-cyl (1970-76)

  (2 per car, sold individually)
Note: 10/10mm

Elring
Brand Rating
$0.75
Oil Cooler Seal  
 
[ More Info ]
- 914 4-cyl (1970-76)

  (2 per car, sold individually)

Reinz
Brand Rating
$0.50
Oil Cooler Seal  
 
[ More Info ]
- 914 4-cyl (1970-76)

  (2 per car, sold individually)

Genuine Porsche
Brand Rating
$11.50

Machined for 3/8" pipe thread fittings, our adapter allows you to connect 10AN (5/8") oil line fittings.
Porsche Home  >  Porsche 914, 914-6 (1970-1976) > Engine  >  Oil Circulation 

  Page 5 of 6  <123456>



Page last updated: Thu 9/21/2017 04:16:08 AM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window