Parts Catalog Accessories Catalog Tech Info Tech Forums
 
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
2001 Mercedes-Benz C240 Base Sedan
 
Mercedes-Benz Home > 2001 Mercedes-Benz C240 Base Sedan > Transmission & ClutchTransmission  

Transmission - Page 1

Manual Transmission Fluid
Your manual transmission can take a heck of a beating over the years and it is one of the most neglected service areas on a car. The fluid assists in the lubrication and heat disputation of the transmission, and even though it is in a closed environment, the fluid can become old and contaminated. It should be checked for level and changed as per the vehicles service manual.
Fluid Pumps
Drive Line Fluid Filler - 5 Liter
 
Brand:  Assenmacher Specialty Tools  
[More Info]
 
 Rating:
 
  Note: Hand pump fluid filler used to fill transmissions, differentials and transfer cases for Mercedes Benz vehicles with a 722.9 automatic transmission, using a 12 X 1.5 mm adapter, Hand pump dispenses efficiently. On/off ball valve. Container made of ultra high density polyethylene (UHDP). 4 ft. 10 in. hose length, Contains: (Qty.) (1) Pump, (1) Container, (1) Hose, (1) On/Off Ball Valve, (1) Quick Attachment Adapter, Not suitable for fuels or solvents.
Part Number: ATF-1004-5-MB-M1220
$227.75
Drive Line Fluid Filler - 5 Liter
 
Brand:  Assenmacher Specialty Tools  
[More Info]
 
 Rating:
 
  Note: Hand pump dispenses efficiently. On/off ball valve. Container made of ultra high density polyethylene (UHDP). 4 ft. 10 in. hose length, Hand pump fluid filler used to fill transmissions, differentials and transfer cases, Contains: (Qty.) (1) Pump, (1) Container, (1) Hose, (1) On/Off Ball Valve, (8) Quick Attachment Adapters.
Part Number: ATF-1008-5-EURO-M1220
$452.25
Drive Line Fluid Filler - 5 Liter
 
Brand:  Assenmacher Specialty Tools  
[More Info]
 
 Rating:
 
  Note: Contains: (Qty.) (1) Pump, (1) Container, (1) Hose, (1) On/Off Ball Valve, (5) Quick Attachment Adapters, Hand pump fluid filler used to fill transmissions, differentials and transfer cases for VW/Audi, Hand pump dispenses efficiently. On/off ball valve. Container made of ultra high density polyethylene (UHDP). 4 ft. 10 in. hose length.
Part Number: ATF-1033-5-VW-M1220
$298.75
Fluid Hand Pump - Sta-Lube Fluid Oil Pump
 
Brand:  CRC Industries  
[More Info]
 
 Rating:
 
  Note: Constructed of durable PVC plastic. For all fluid reservoirs including differentials, transmissions and gear cases. Dispenses 1 oz. of product with each depression. Screw-on design to fit all quart, half-gallon, gallon, liter and five-liter containers.
Part Number: SL4344-M633
$9.75
Fits most 1/2 gallon and gallon bottles. Unique hands free locking nozzle. Each depression accurately dispenses 1 oz. of fluid. Ideal for hard to reach places. No mess, no waste - easy to use. Works great for filling transmissions and differentials. Made of durable ABS plastic. Tough, easy to use and reusable. NOT FOR USE WITH BRAKE FLUID!
Sta-Lube Fluid Oil Pump
    [More Info]
 
    
 (8 customer reviews)
Part Number: SL4344
$9.65
Funnels
Multi Purpose Funnel - PIG Form-A-Funnel (6.5" X 14.5")
 
Brand:  Pig  
[More Info]
 
 Rating:
 
  Note: Unique tool for draining oil and other fluids from any type of vehicle or equipment. Molds into and holds any shape to create a leakproof channel for draining oil or fluid. Thick, pliable nitrile rubber encases a thin layer of alloy to allow thousands of shapings. Highly compatible nitrile resists common vehicle liquids in temperatures from 0 to 300 deg. F. Soft rubber edge forms a seal around filters or drains.
Part Number: 18609-M1221
$23.00
Multi Purpose Funnel with Spout
 
Brand:  Hazet  
[More Info]
 
 Rating:
 
  Note: Suitable for all common fluids. Funnel and spout made of polypropylene. Includes stainless steel filter, 165 mm funnel diameter. 480 mm total length, including spout.
Part Number: 198-1-M970
$22.00
New Pig Form-A-Funnel, 9" x 4.75"
    [More Info]
 
    
 
Part Number: PEL-PIG18509
$9.99
New Pig Form-A-Funnel, 14.5" x 6.5"
    [More Info]
 
    
 (1 customer review)
Part Number: PEL-PIG18609
$19.99
Straight out of the "Why didn't I think of that?" bin comes the Form-A-Funnel from New Pig. Divert oil around engine parts and right into your drain pan for guaranteed no-mess oil changes! The Form-A-Funnel Draining Tool bends, molds and holds any shape so you can customize the perfect channel to drain liquids without making a mess. The Form-A-Funnel features a thick, pliable nitrile rubber coating that completely encases a thin, bendable layer of aluminum alloy; reshape and reuse thousands of times without fazing it. Highly compatible nitrile rubber ensures safe handling when used with common vehicle liquids and chemicals; works in temperatures from -30deg F to 425deg F. The Form-A-Funnel cleans easily with a wet rag and is compatible with most cleaners and degreasers. You can even store it flat or roll it up.
New Pig Form-A-Funnel, 29" x 5"
    [More Info]
 
    
 
Part Number: PEL-PIG18611
$34.95
New Pig Form-A-Funnel, 22" x 8.6"
    [More Info]
 
    
 (1 customer review)
Part Number: PEL-PIG18714
$34.99

This Flex-tube Spout attaches to most containers and allows you to accurately position the mouth of the tube exactly where you want it to be located. Two thread sizes to fit most containers. Screws on to motor oil, antifreeze, windshield washer fluid, and similar plastic containers. Complete with stopper cap and hang tab.
Plastic Flex Spout
    [More Info]
 
    
 
Part Number: PLE-60-200
$6.45
Transmission Tools
Removes transmission mainshaft groove nut.
Mainshaft Groove Nut Socket
    [More Info]
 
    
 
Part Number: BM-111-0507
$81.00

Installs K1 (135mm) 134 ID, 136 OD clutch piston into outer disk carrier.
K1 Clutch Piston Guide Sleeve
    [More Info]
 
    
 
Part Number: BM-112-0161
$140.00

Use to guide the clutch piston K1 (127 mm) and K2 into outer disk carrier (Use with sleeve BM-201-0214).
Clutch Piston Installer Sleeve
    [More Info]
 
    
 
Part Number: BM-126-0314
$147.00

Use to guide the reverse gear piston into front cover.
Reverse Guide Piston Guide Sleeve
    [More Info]
 
    
 
Part Number: BM-126-0414
$67.00

For checking free travel on brake band piston B1.
Brake Band Measuring Screw
    [More Info]
 
    
 
Part Number: BM-126-0621
$49.00

Use to guide the clutch piston K1 (118 mm) into the outer disk carrier (Use with sleeve #140-0014).
K1 Clutch Piston Guide Sleeve
    [More Info]
 
    
 
Part Number: BM-126-1014
$107.00

For measuring axial play on rear planetary gear set. (HCB A1037-2)
Planetary Gear Set Gauging Disk
    [More Info]
 
    
 
Part Number: BM-129-0623
$47.00

For guiding clutch piston K1 and K2 into the outer disk carrier. (Use with sleeves BM-126-0314 and BM-126-1014).
K1 and K2 Clutch Piston Guide Sleeve
    [More Info]
 
    
 
Part Number: BM-140-0014
$67.00

Installs K1 (135mm) clutch piston into outer disk carrier. 4 speed.
K1 (135mm) Clutch Piston Guide Sleeve
    [More Info]
 
    
 
Part Number: BM-201-0114
No Longer Available

Use to guide reverse gear piston into front cover. 4 speed.
Reverse Gear Piston Guide Sleeve
    [More Info]
 
    
 
Part Number: BM-201-0214
$66.00

Assembly tool for brake band piston B1.
Brake Band Piston Loader
    [More Info]
 
    
 
Part Number: BM-201-0359
$126.00

Measuring screw with plate for free travel on brake band piston B1.
Brake Band Piston Gauge
    [More Info]
 
    
 
Part Number: BM-201-0721
$49.00

Installs snap ring on spring plate for K1, K2, B3.
Snap Ring Assembly Tool
    [More Info]
 
    
 
Part Number: BM-201-1243
$126.00

Compresses clutch packs K1, K2, K3 and brake bands B1 and B2. 1000N.
Clutch Pack Compressor
    [More Info]
 
    
 
Part Number: BM-208-0021
$131.00

Removes the output shaft nut on manual transmissions.
Driveshaft Groove Nut Socket
    [More Info]
 
    
 
Part Number: BM-915-0107
$74.00

Removes the small driveshaft nut.
Driveshaft Groove Nut Socket
    [More Info]
 
    
 
Part Number: BM-915-0807
$78.00

Use to remove the screw plug on the secondary pump.
Secondary Pump Screwdriver
    [More Info]
 
    
 
Part Number: BM-916-0011
$52.00

Removes groove nut on the main shaft and joint flange of manual transmissions.
Mainshaft/Flange Joint Groove Nut Socket
    [More Info]
 
    
 
Part Number: BM-986-1107
$78.00

Comes with Straight, Long 90 degree bend, short 90 degree bend, CVT, and DSG adapters.
Transmission Filler Kit
    [More Info]
 
    
 
Part Number: BM-B1924
$392.00

12 point 1/2" DR. with thin walls and deep broaching for collar nut on drive flange.
Drive Flange Socket, 30mm Extra Deep
    [More Info]
 
    
 
Part Number: BM-ST51-30
$47.00

Mercedes-Benz Home  >  2001 Mercedes-Benz C240 Base Sedan > Transmission & Clutch  >  Transmission  

  Page 1 of 1  1


Browse Transmission for all C-Class (2001-2007) W203 vehicles

  Search our site:    
   Cart  | Project List | Order Status | Help    
 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright 2012, Pelican Parts Inc. -    DMCA Registered Agent Contact Page

Page last updated: Wed 7/30/2014 01:23:38 AM