Parts Catalog Accessories Catalog Tech Info Tech Forums
 
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
1955 Mercedes-Benz 190SL Base All
 
Mercedes-Benz Home > 1955 Mercedes-Benz 190SL Base All > Tools & BooksTools  

Tools - Page 4

Engine Stands
Specifications:
  • 63:1 worm gear ratio allows easy rotation of engine
  • Self-locking in any rotated position
  • Folds for easy storage
  • Heavy-duty fixed rear castor and swivel locking front castors
  • Oil Drip Pan available separately (SUN8300DP)
  • OTC 2 year warranty


Manufacturer: SUNEX Tools
Geared Engine Stand - 1,000 Lb
    [More Info]
 
    
 
Part Number: TOL-SUN8300GA
$423.95
Engine Support Bars
Suspends engine during removal of transmission, or other mechanical work.
Engine Support Bridge
    [More Info]
 
    
 
Part Number: BM-10-222A
$435.00
Engine Tools
These specialty tools are designed for use specifically with your vehicle. If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process.
Valve Spring Compressors
Compressor easily removes valve springs on most cars and light trucks. Tool can be used with the cylinder head on or off the engine. Features a removable handle allowing use with 5/8" socket or wrench in confined areas and an extra-long leg for more applications. For best results, use with 901 or 2992 Air Hold Fittings to pressurize the cylinder and keep the valves in place during removal of the spring and keepers. Includes: Long Leg, length 3 15/32", Short Leg, length 3 5/32" Manufacturer: KD TOOLS
OHV Valve Spring Compressor
    [More Info]
 
    
 
  Note: Not required on 1985 or older Mercedes-Benz diesel models
Part Number: TOL-KD3271
$48.95

With this latest evolution to our Universal Valve Spring Tool we have added the ability to actuate the compression tube even in tight confined locations like under the cowl where the lever cannot be moved or may not even fit. By adding the ability to separate the lever from the compression tube anywhere along the bar you can compress the springs that are confined by brake boosters, AC housings or other factors by locating the lever along the bar where there is open space.

  • Access to valves in areas that are not in open areas with engine in vehicle
  • Valve springs can be depressed "remotely", depressor bar and compression tube are separate
  • Complete universal kit with multi adjustable points
  • No need to remove engine due to confined areas saving time
  • No other valve spring compressor is as universal and adjustable
  • Depressor tube slides easily to each valve location without changing settings
  • All components store neatly in a blow molded box
Universal Valve Spring Compressor
    [More Info]
 
    
 
  Note: Not required on 1985 or older Mercedes-Benz diesel models
Part Number: TOL-SP91400B
Out of stock
Timing Lights
The MSD Timing Light is built using solid state circuitry and uses a unique SCR (silicon controlled rectifier) that provides accurate and stable timing signals from 0 to 8000 rpm. The MSD Timing Light is equipped with a high output Linear Xenon flash tube and a focused fresnel lens to produce a light that is bright enough for use on the sunniest of days. A shock absorbing rubber nose cone is also added to protect the lens. This rugged timing light is built to last in rough environments. A six foot lead with a heavy duty inductive metal pickup that can be attached to the spark plug wire in any direction is supplied with the timing light for easy hookup. The MSD Timing Light can be used on all engines with standard or capacitive discharge ignition systems

An accurate timing light is extremely important to the performance of your engine. MSD's new Self-Powered Timing Light is a tool every performance tuner should have. A great feature of the Self-Powered Timing Light is that it does not require 12 volts. This means less wires are hanging over the engine compartment and makes for quick, easy checks. For power, the Light uses six AAA batteries. The lightweight assembly is injection molded for great durability and produces an intense strobe that is easy to view through 5,000 rpm. The inductive pick-up is detachable for easy storage.
MSD Self Powered Timing Light
    [More Info]
 
    
 
Part Number: PEL-MSD8991
$369.95
Drive Belt Installation Tools
Drive Belt Installation / Removal Tool Kit - Conti Uni-Tool Elast
 
Brand:  Contitech  
[More Info]
 
 Rating:
 
  Note: For use with self-tensioning, stretch type belts, Contains: (Qty.) (1) Installation Tool, (1) Fabric Removal Strap, (1) Bolt, (1) Nut, (1) Washer.
Part Number: 55-9311-010-M21
$148.75
Case Drilling Fixtures
This case drilling fixture is used to install Timesert inserts when the cylinder bolt holes strip in light alloy type engine case. Use with Timesert kit BM-TS1015 and inserts BM-TS10155.
Case Drilling Fixture for V-8 Engines
    [More Info]
 
    
 
Part Number: BM-117-0223
$506.00
Diesel Tools
Use to remove broken glow plugs.
Broken Glow Plug Remover Set - Comes with 1/4", 8mm and 10mm Taps.
    [More Info]
 
    
 
  Note: For CDI models only
Part Number: BM-900-0199
$296.00
Cylinder Head Tools
Controlled pressure assures positive, adjustable contact through full range. Operates with any electric drill. Furnished with 3" long 220 grit stones. adjustable stop collar permits quick selection of two ranges, from 2" to 4" and from 4" to 7". Stone arms easily compress to eliminate cylinder scratches when inserting and removing. Manufacturer: LISLE
Engine Cylinder Glaze Breaker
    [More Info]
 
    
 
Part Number: TOL-LIS23500
$28.95

Hone and remove glaze from engine cylinders from 2" to 7" (51 to 177mm) in diameter. Adjust spring tension for positive cutting action and set diameter with spread limiter. Hone includes medium grit stones No. 240. Manufacturer: KD TOOLS
Engine Cylinder Hone
    [More Info]
 
    
 
Part Number: TOL-KD2833
$26.95

Install pistons from 2-7/8" to 4-3/8" (73 to 111mm). Pliers can be used parallel or perpendicular to the cylinder block. Fine-tooth ratcheting lock allows you to compress bands in small increments. Set works by placing a band around the piston, covering the rings and hooking pliers into the band and squeezing. With the band tightly around the piston, insert piston into cylinder and tap lightly with hammer handle to install. Set includes pliers and 6 bands, 1119 through 1124. Manufacturer: KD TOOLS
Piston Compressor Kit, 73mm-111mm range
    [More Info]
 
    
 
Part Number: PEL-KD-850
$66.00

This cylinder bore gauge is a quality import at a value price. Features: Self-centering design, 2-6" range, 0.0005 graduations. Comes packaged in a fitted wooden box Manufacturer: STORM BY CENTRAL TOOLS
Cylinder Bore Gauge
    [More Info]
 
    
 
Part Number: TOL-STO3D301
$119.95

This set contains:
  • (1) M10 Ribe
  • (1) M12 Ribe
  • (1) M10XZN
  • (1) M12XZN
  • (1) M14XZN
  • (1) M10 Hex
  • (1) T60 Torx
  • (1) E12 Torx
Head Bolt Socket Set
    [More Info]
 
    
 
Part Number: BM-AS6005
$99.25

Use this compressor to install pistons 2-1/8 to 5" (54 to 127mm) in diameter. Positive lock action provides positive compression and fingertip release. To compress piston ring into grooves, slip the tool over the piston and tighten with L-shaped wrench. Insert piston into cylinder and tap with a hammer to install. Enlarged crimped edge prevents compressor from entering the cylinder. Manufacturer: KD TOOLS
HD Piston Ring Compressor
    [More Info]
 
    
 
Part Number: TOL-KD2284
$12.95
Mercedes-Benz Home  >  1955 Mercedes-Benz 190SL Base All > Tools & Books  >  Tools  

  Page 4 of 10  <12345678910>


Browse Filters & Belts for all 190SL (1955 - 1963) R121 vehicles

  Search our site:    
   Cart  | Project List | Order Status | Help    
 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright 2012, Pelican Parts Inc. -    DMCA Registered Agent Contact Page

Page last updated: Tue 4/8/2014 11:02:43 PM