Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1999 BMW 328is Base Coupe
 
BMW Home > 1999 BMW 328is Base Coupe > Suspension & SteeringAxles, Bearings & Differential 

Axles, Bearings & Differential

- Page 5

Wheel Hub Cleaning Tools
Wheel Hub Cleaning Tool Kit - 12 Piece  
 
[ More Info ]

Note: Used to clean wheel and brake disc hubs. Aluminum cleaning pad holder with 8-point profile. No spark, cup-shaped, open-pored abrasive material cleaning pads reduce dust formation. Hook and loop attachment of cleaning pads. Designed for use with power drill. Wear resistance: approximately 50 vehicles per pad, Contains: (Qty.) (1) Aluminum Cleaning Pad Holder, (5) 40 mm Cleaning Pads, (6) 50 mm Cleaning Pads, For replacement cleaning pads, see part # 4960N-40/5 for 40 mm and 4960N-50/5 for 50 mm.

Hazet
Brand Rating
$187.25

Wheel Hub Cleaning Pad Set - 5 Piece  
 
[ More Info ]

Note: Replacement 40 mm cleaning pads for Hazet # 4960N-45/12, Contains: (Qty.) (5) 40 mm Cleaning Pads.

Hazet
Brand Rating
$65.50

Wheel Hub Cleaning Pad Set - 5 Piece  
 
[ More Info ]

Note: Replacement 50 mm cleaning pads for Hazet # 4960N-45/12, Contains: (Qty.) (5) 50 mm Cleaning Pads.

Hazet
Brand Rating
$68.25

Wheel Spacers

Many wheels are not a direct fit with big brake kits or coilover suspensions. A wheel spacer helps by moving the wheel away from the caliper, wheel spokes, or suspension that is causing the clearance issue. If your wheels have the wrong offset (too high an offset, causing the wheels to be too far inward) a set of wheel spacers can correct this by pushing the wheel out to the correct offset.
H&R TRAK+ Wheel Spacers
When it comes to all-out cornering performance, one rule applies: wider is really, truly better. H&R TRAK+ wheel spacers let you balance the handling and performance of your car to suit your aggressive driving style, and without spending the time, money and trouble of springing for bigger wheels and tires. Most manufacturers leave 20 to 30mm of extra space between the wheels and the fenders, to suit arcane regulations or to leave space for flapping tire chains. These light-alloy spacers push your existing wheels or even your hot, aftermarket alloys out to fill the wheelwells properly, giving you better cornering, better aerodynamics and even better looks.

DR Series (6-40mm Track Widening)
This spacer is fitted between the wheel and hub, using longer wheel bolts (ordered separately). Please check type of bolt head (taper or round and diameter) and shaft length before ordering.

DRA Series (6-60mm Track Widening)
This Spacer is fitted to the hub with special wheel bolts and has new threaded holes for existing wheel bolts.

NOTE: ALL DRA kits come complete with all necessary wheel bolts, studs and nuts to mount the adapter to your original hub. These will be used in connection with the existing parts fitted to the vehicle.
RaceMax Wheel Spacers
RaceMax is an Italian company that specializes exclusively in producing high-quality wheel spacers and adapters. RaceMax begins with 6063-T6 aluminum, which is drop forged, then the blanks are CNC machined to within .0005 tolerance. Each piece is then heat treated for stress relief and anodized for corrosion protection. RaceMax spacers thicker than 12mm are machined to include the protruding hub centering rings ("hub centric"), which will always center your wheel for proper wheel balance.
Turner Motorsport Hub-Centric Wheel Spacers
These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer "concept". This is not just a rework of an existing spacer but a ground-up, clean sheet design based on years of BMW service and motorsports.

This latest spacer design incorporates pockets around the entire circumference of the spacer. These pockets allow you to easily pop the spacer off with a flat blade screwdriver without damaging it. TMS starts with very strong and lightweight high-grade aluminum with a strong resistance to corrosion. They go the extra step and have our spacers coated with a military-spec hard-coat for extreme corrosion prevention and with a dark gray color to blend in with your wheel and brake package for best appearance. All Turner Spacers are CNC machined to very tight machining tolerances to save weight while not affecting strength. These spacers are engineered and manufactured to preserve ride quality, last a long time, and enhance your BMW's handling and looks. Each spacer is laser engraved with its size for fast identification.

NOTE: TMS Spacers are suitable for 5-lug (5x120mm) applications ONLY.



BMW Home  >  1999 BMW 328is Base Coupe > Suspension & Steering  >  Axles, Bearings & Differential 

  Page 5 of 7  <1234567>


Browse Axles, Bearings & Differential for all 3-Series E36 (1992-1999) vehicles

Page last updated: Wed 12/13/2017 03:17:28 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window