Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2007 BMW 328i Base Coupe
 
BMW Home > 2007 BMW 328i Base Coupe > Transmission & ClutchClutch & Flywheel  

Clutch & Flywheel

- Page 2

SPEC Stage 4 Clutch Kit
SPEC Stage 4 Clutch Kits are a solid hub version of the stage 3. The hub is solid 8-rivet and the assembly is heat treated for strength and durability. It is available in a 3, 4 or 6 puck configuration. Use the 3 puck for the lightest option or the 6 puck for the smoothest engagement. The 4 puck is a good compromise for both. Street drivable in 6 puck configuration, but not street friendly due to the rigid hub. Best for drag racing, road racing, pulling, rallye and drift. Some kits may not include the throwout bearing, please contact us to see if your kit does.
SPEC Stage 5 Clutch Kit
SPEC Stage 5 Clutch Kits feature a full-metallic disc with the highest possible friction co-efficient. Street drivable but not street-friendly. The hub is solid 12-rivet and the assembly is heat treated for strength and durability. Best for extreme street and drag racing. Some kits may not include the throwout bearing, please contact us to see if your kit does.

Clutch and Flywheel Conversion Kits

These kits are used when mixing and matching different flywheels to different clutch packages.

Flywheel Conversion Kit  
 
[ More Info ]

Note: Solid flywheel conversion kit that replaces the original dual-mass unit, Contains: (Qty.) (1) Solid Flywheel, (1) Disc, (1) Pressure Plate, (1) Release Bearing, (6) Flywheel Bolts, (6) Pressure Plate Bolts,

Valeo
Brand Rating
$738.00

Clutch Tools

Pressure Adaptor needed for pressuring the master cylinder or clutch slave cylinder reservoirs. Used in conjunction with a pressure bleeder. Comes with a 1/4-18 NPT threaded opening. Applicable to most European models.

Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm.

These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16.

Clutch Disc Spline Grease

Clutch Disc Spline Grease - SACHS High Performance (80 gram Tube)  
[ More Info ]

Note: Used to lubricate the clutch disc splines and manual trans input shaft splines.

Sachs
Brand Rating
$7.25

Flywheels and Parts

Every time you replace your clutch, you should inspect your flywheel. If it's scored or if there is significant wear in the surface, then you should have it checked and resurfaced. If you have any doubts, replace it with a new one. Scored or burnt flywheels will not create a good mounting surface on which to press the clutch disc, and could very well lead to your clutch slipping later on.
Dual-Mass Flywheel

Pressure Plates

The pressure plate is what holds the clutch disc against the flywheel and transfers power from the engine to the transmission. If the pressure plate is old or failing, the clamping force may not be enough to transfer all of the power from the flywheel to the transmission without having the clutch 'slip.' A worn out clutch disc may also contribute to the slipping of the clutch.
BMW Home  >  2007 BMW 328i Base Coupe > Transmission & Clutch  >  Clutch & Flywheel  

  Page 2 of 4  <1234>


Browse Clutch & Flywheel for all 3-Series E90/E91/E92/E93 (2006-2013) vehicles

Page last updated: Wed 12/13/2017 12:45:03 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window