Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2007 BMW 328i Base Coupe
 
BMW Home > 2007 BMW 328i Base Coupe > BrakesBrake Performance Upgrades 

Brake Performance Upgrades

- Page 1

StopTech Big Brake Kits

StopTech Big Brake Kits exceed stock performance in two key areas: First, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel and confidence-inspiring responsiveness.

The key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why StopTech developed the Balanced Brake Upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.

Every StopTech Balanced Big Brake Kit is engineered to produce that optimal balance using caliper bores and pistons specifically selected and tested for each vehicle application. This is what sets StopTech apart from off-the-shelf solutions.

In contrast, a brake upgrade that adds too much front torque (as many do), will reduce your car's ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver's control of brake input.

Features and Benefits:

  • Balanced Brake Upgrades with optimum brake bias offer the shortest stopping distance with the best pedal feel.

  • Patented AeroRotors offer the best airflow available for better cooling, less fade and longer rotor and pad life.

  • StopTech provides the stiffest fully-forged aftermarket calipers with patented, removable bridges that provide better clamping under hard braking and less pad taper.

  • StopTech Big Brake Kit components are made in the USA in a 70,000 square foot California manufacturing, engineering, and R&D center.

Every StopTech Big Brake Kit includes:

  • Fully Forged 2-piece, opposed piston caliper
    • StopTech calipers are available in 6-piston, 4-piston and 2-piston configurations
    • StopTech 2-piece calipers have the lowest amount of flex and delection among 2 of the leading caliper models
    • StopTech caliper finish is a glossy high temperature paint available in red, black, silver, blue, yellow, gold as well as a natural anodized coating

  • 1-piece Sport Rotors or 2-piece AeroRotors
    • StopTech Sport Rotors are direct replacements for factory discs and offer improved cooling, and feature a durable black e-coating on the hat of the rotor to prevent corrosion.
    • StopTech's patented AeroRotors are 2-piece replacement rotors featuring a billet aluminum AeroHat and AeroRotor friction ring. These rotors feature a patented AeroVane optimal cooling vane design to improve rotor airflow, cooling and heat capacity. This improved directional design minimizes turbulence and flows up to 61% more air than any rotor tested. Better airflow means better cooling and less fade.

  • Hard Anodized 6061-T6 Billet aluminum Mounting Brackets with Stainless Steel Studs
    • Application specific design for precise and proper fitment

  • StopTech Stainless Steel Brake Line Kits
    • Braided stainless steel lines reduce system compliance and improve brake pedal feel and modulation
    • StopTech's Stainless Steel Brake Lines are D.O.T. compliant and designed to fit your vehicle

  • StopTech Street Performance Brake Pads
    • StopTech Street Performance Pads are intended for high performance street driving as well as light duty track use
    • Low dust formulation is rotor friendly and leaves wheels cleaner
    • Scorched to raise initial cold effectiveness and ease bed-in
StopTech 2-Piece AeroRotor BBK

StopTech AeroRotor Rings


The patented 2-piece AeroRotor assembly uses uniquely designed and patented AeroVanes inside the disc to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows up to 61 percent more air than any other rotor tested. The result is up to 80 percent better airflow over original equipment rotors and 10-30 percent better airflow than other directional vane racing rotors currently available. Better airflow equals better cooling, and better cooling means less fade and better overall brake system performance.

StopTech AeroRotors also feature a proprietary alloy chemistry. By adding molybdenum to the gray iron, carefully targeting a narrow range of hardness and tensile strength values, and controlling the cooling rate of the rotor after casting, StopTech produces a friction ring with added crack resistance as well as improved functionality.

It is crucial to check the vehicle and the parts on the vehicle to make sure that the brakes will fit.

DOWNLOAD WHEEL FITMENT GUIDE HERE

It is crucial to check the vehicle and the parts on the vehicle to make sure that the brakes will fit.

DOWNLOAD WHEEL FITMENT GUIDE HERE

StopTech Trophy BBK
Intended for ultra-high performance street use. They are designed for street driven production vehicles. The Trophy Sport Big Brake Kits use the same STR calipers, AeroRotors and AeroHats found in the full-race Trophy Kits, but add silicone dust boots for extended service intervals and anti-rattle rotor mounting hardware for quieter operation. They also include StopTech® Street Performance Brake Pads for high performance street and occasional track use. Trophy Sport Big Brake Kits are the ultimate street braking system.

Cool Carbon Performance Brake Pads

Cool Carbon Performance establishes the new reference in performance braking for performance street/ AutoX/ HPDE/and light track. Both Cool Carbon compounds have been developed at German R&D facilities and have been tested extensively on the German autobahn. Cool Carbon Performance brake pads deliver true undiluted performance.

Street Performance/Track Tuned (S/T) - This compound has a friction level above OE, increasing with heat, and with better torque and stopping capability. It is very stable, both cold and hot to temperatures exceeding 450 C (842 F), due to a special "hollow" ceramic structure that exhibits excellent heat dissipation characteristics. Constrained layer noise shims minimize possibility of noise under all driving conditions. Improved pedal feel and reduced dust can be expected after fully bedded.

S/T compound - Features very linear braking, consistent torque, stopping ability & temperature stability; very good fade resistance; long life, rotor friendly, low dust/ noise;
Excellent for daily street use as well as AutoX and HPDE.

Click here for technical information and the complete Cool Carbon Application Guide.

Click here for proper break in/brake pad bedding instructions.



BMW Home  >  2007 BMW 328i Base Coupe > Brakes  >  Brake Performance Upgrades 

  Page 1 of 3  123>


Browse Brake Performance Upgrades for all 3-Series E90/E91/E92/E93 (2006-2013) vehicles

Page last updated: Wed 12/6/2017 12:41:13 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window