Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2007 BMW 328i Base Sedan
 
BMW Home > 2007 BMW 328i Base Sedan > Water Cooling SystemWater Pump, Thermostat & Hoses 

Water Pump, Thermostat & Hoses

- Page 1

Water Pumps

Is your car starting to run a little hot? Is it overheating while sitting at idle? It's possible you may need to replace your water pump. An easy way to check your water pump is to look underneath the car and check for water seepage out of the pump. This means that water is leaking past the bearing and seals, indicating the pump is on its way out. Another way to check is to squeeze and hold the upper radiator hose for a few seconds (CAUTION: the hose may be hot) while the car is running. If you feel no pressure building up, it is a sign that water is not circulating and the pump may be bad. These units are brand new, not rebuilt.
Water Pump
Water Pump  
 
[ More Info ]

Note: This brand includes the bolt kit.

Pierburg
Brand Rating
$416.50
Water Pump  
 
[ More Info ]

Note: This brand does not include the bolt kit.~Also use: (Qty.) (1) 11 51 0 392 553 bolt kit.

Genuine BMW
Brand Rating
$527.50

Water Pump Parts

This section contains the parts needed when servicing or replacing the vehicle's water pump.
Water Pump Bolt Kit - 8 X 32 mm (Aluminum)
Water Pump Bolt Kit - 8 X 32 mm (Aluminum)  
 
[ More Info ]

Note: Aluminum For electric pump 11 51 7 563 659 One time use only Set of 3 screws

Siemens/VDO
Brand Rating
$6.25

Coolant Thermostats

Is your car's temperature too hot or cold? A coolant thermostat allows the coolant to circulate when the engine has reached a predetermined temperature. It should close when the engine is cold to allow it to warm up faster. Thermostats can fail and should be inspected for corrosion when servicing the cooling system. Thermostats come in different temperature settings for different climates.
Thermostat with Housing (97 deg. C)

Water Hoses

Coolant Hose Flanges, Plugs and Seals

The coolant flange like any part of the cooling system can corrode and fail over time. Make sure to inspect them every time you service the cooling system.
Bleeder Screw with O-Ring for Cooling System

Cooling System Tools

Cooling System Tester Adapter (Tank Adapter)  
 
[ More Info ]

Note: Used for pressurizing the cooling system. With female 52 X 3 mm buttress threads. For use with BMW,

Assenmacher Tools (AST)
Brand Rating
$72.25

Bleeder tank, Pump, and 2ft. of hose and female brass fitting. Includes everything except the cap so you can customize your own kit for different setups or vehicles.
Motive Products 2-gallon Power Extractor new part number 1702 Power Extractor  
 
[ More Info ]

Note: Includes dipstick probe for oil changes and flexible tube for vacuum brake bleeding.

$64.95

BMW Home  >  2007 BMW 328i Base Sedan > Water Cooling System  >  Water Pump, Thermostat & Hoses 

  Page 1 of 1  1


Browse Water Pump, Thermostat & Hoses for all 3-Series E90/E91/E92/E93 (2006-2013) vehicles

Page last updated: Wed 12/13/2017 12:28:25 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window