Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2006 BMW 325xi Base Wagon
 
BMW Home > 2006 BMW 325xi Base Wagon > Transmission & ClutchClutch & Flywheel  

Clutch & Flywheel

- Page 1

Clutch Kits

This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time and also replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, you should have it re-surfaced so your new clutch seats correctly.
Clutch Kit
Clutch Kit  
 
[ More Info ]

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Pilot Bearing, (1) Release Fork Lever, (1) Clutch Alignment Tool, Also use- (Qty.) (1) 23 00 0 392 607 bolt set, (6) 21 20 7 548 052 bolt, Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable,

LuK
Brand Rating
$336.00
SPEC Stage 1 Clutch Kit
SPEC Stage 1 Clutch Kits feature an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications. Some kits may not include the throwout bearing, please contact us to see if your kit does.

SPEC Stage 2 Clutch Kit
SPEC Stage 2 Clutch Kits feature segmented or full faced pure Kevlar disc with steel backing. This lining features excellent drivability like the stage 1, but offers slightly longer life and higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street, drag, pulling and autocross. Some kits may not include the throwout bearing, please contact us to see if your kit does.

SPEC Stage 2+ Clutch Kit
SPEC Stage 2+ Clutch Kits feature a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and Kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, autocross, road racing, pulling, rallye and drift. Some kits may not include the throwout bearing, please contact us to see if your kit does.

SPEC Stage 3 Clutch Kit
SPEC Stage 3 Clutch Kits feature a carbon semi-metallic 6 puck sprung hub disc that has been the leading puck clutch in drivability, life and torque capacity. This unit is designed for street and race cars that require an aggressive but streetable engagement and high torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Also available in 3 puck configuration. Great for street, drag, road racing, pulling, rallye and drift. Some kits may not include the throwout bearing, please contact us to see if your kit does.

SPEC Stage 3+ Clutch Kit
SPEC Stage 3+ Clutch Kits are the flagship stage for a high powered street or race car that requires a manageable and friendly engagement. The stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, drift, autocross, road racing, pulling, rallye and drift. Some kits may not include the throwout bearing, please contact us to see if your kit does.

BMW Home  >  2006 BMW 325xi Base Wagon > Transmission & Clutch  >  Clutch & Flywheel  

  Page 1 of 4  1234>


Browse Clutch & Flywheel for all 3-Series E90/E91/E92/E93 (2006-2013) vehicles

Page last updated: Wed 12/13/2017 12:15:20 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window