Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2006 BMW 325xi Base Sedan
 
BMW Home > 2006 BMW 325xi Base Sedan > Body & SealsChassis Panels & Sheet Metal 

Chassis Panels & Sheet Metal

- Page 3

Battery Trays

Old batteries can leak caustic and corrosive fluids, destroying your car's metal. Battery trays are used to protect the car's metal from the potential caustic damage that can happen from an old battery. It is a good idea to install a battery tray as it is easier and cheaper to replace the tray rather than the car's sheet metal.

Body Access Plugs


Jack Pads

Due to the unique jack mount points on some cars it can be difficult to safely lift your vehicle with a floor jack without damaging your pride and joy. A Jack Pad is the answer to the problem. Now you never have to worry about damage to your undercarriage again!
Jack Pad Adapter - Black Anodized Aluminum  
 
[ More Info ]

Note: Designed to fit into the factory under car jack pads, creating a flat circular jack point for a hydraulic floor jack,

Domestic Aftermarket
Brand Rating
$26.25

Roll Cages and Bars

If you're thinking about taking your car to the track make sure it's got a roll bar. Roll bars give addition support and protection in the event of a roll over.
Cantrell Motorsports is proud to offer the strongest, safest E90/92 bolt-in roll bar on the market. They design all of their bars with safety as the first concern. Under a crash or impact scenario, their bar will stay in place and provide the utmost safety possible.

Tow Hooks and Bars

Have you found yourself looking at the track from the sidelines and need a tow? Has your car broken down and you would like to be sure they tow it from the right spot on the car? Tow hooks are used to tow the vehicle from a structurally designed safe point. There should be one on the front and back.


Rennline's race tow hooks install in minutes on any BMW that came with a factory screw in tow hook. Designed to screw directly into the factory bumper pull location. These pulls are a 2 piece design allowing you to mount them close to the factory bumper cover without the worry of scratching your paint while screwing them on. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. This hook is 5" long.

Rennline's race tow hooks install in minutes on any BMW that came with a factory screw in tow hook. Designed to screw directly into the factory bumper pull location. These pulls are a 2 piece design allowing you to mount them close to the factory bumper cover without the worry of scratching your paint while screwing them on. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. This hook is 5" long.

Rennline's stainless steel folding race hooks install in minutes on applicable BMW's with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:
  • Ours is the original folding tow hook that has proven itself 1000's of times over the years.
  • Fully machined and chambered edges to eliminate cutting tow straps
  • Flawless brushed surface finish

Rennline's stainless steel folding race hooks install in minutes on applicable BMW's with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:
  • Ours is the original folding tow hook that has proven itself 1000's of times over the years.
  • Fully machined and chambered edges to eliminate cutting tow straps
  • Flawless brushed surface finish

Rennline's stainless steel folding race hooks install in minutes on applicable BMW's with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:
  • Ours is the original folding tow hook that has proven itself 1000's of times over the years.
  • Fully machined and chambered edges to eliminate cutting tow straps
  • Flawless brushed surface finish

Rennline's stainless steel folding race hooks install in minutes on applicable BMW's with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:
  • Ours is the original folding tow hook that has proven itself 1000's of times over the years.
  • Fully machined and chambered edges to eliminate cutting tow straps
  • Flawless brushed surface finish









BMW Home  >  2006 BMW 325xi Base Sedan > Body & Seals  >  Chassis Panels & Sheet Metal 

  Page 3 of 5  <12345>


Browse Chassis Panels & Sheet Metal for all 3-Series E90/E91/E92/E93 (2006-2013) vehicles

Page last updated: Wed 12/13/2017 12:08:24 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window