Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2005 BMW 325xi Base Wagon
 
BMW Home > 2005 BMW 325xi Base Wagon > Suspension & SteeringSuspension, Shocks & Springs 

Suspension, Shocks & Springs

- Page 1

Suspension Kits for BMW

Is your car bouncing around as you drive? Are you looking to maximize the full handling potential of your BMW? Pelican has the solution. For those of you looking to re-new your suspension, we here at Pelican are now pleased to offer these kits for your car.
 The typical kit contains the following parts, in addition to those specifically listed in the description:
  • New Struts and Shocks
  • New Front Strut Mounts
  • New Rear Shock Mounts
  • New Bump Stops (where applicable)
  • New Rear Shock Boots
  • New Front Control Arm Bushings
  • New Front Control Arm Ball Joints
  • New Front and Rear Sway Bar End Links
  • New Strut/Shock Mounting Nuts/Bolts
  • New Front and Rear Spring Retaining Pads
Turner Motorsports Adjustable Rear Camber Arms for Stage 3 and Uber Kits
Installing lowering springs on your E36 will result in increased negative camber on the rear wheels. In order to adjust the rear camber, you'll need to install a set of adjustable camber arms. Turner Motorsports offers two bushing styles to meet your needs, a solid Rod-end or Rubber Bushing end. The high range of adjustment allows a full racecar setup or a heavily lowered car to maintain factory specifications. Aluminum camber arms are designed as a lightweight component thereby reducing wear and tear on other, more critical parts (rear subframe, control arm bushings, etc) Each camber arm weighs only 2.5 lbs making for a total of 5 lbs for both parts (stock camber arms weigh 3 lbs each) TMS Camber Arms use hardcoat anodized aluminum, stainless steel turnbuckles, and stainless rod ends to all but eliminate corrosion from getting into the threads and making adjustment difficult. CNC-machined double shear design for ease of installation, high strength, and choice of outside bushing material. But we do suggest using with BMW rear trailing arm bushing # 33-32-6-775-551 for best performance (These bushings are included with all Pelican Uber Kits). Easy and simple to adjust, the main adjustment point is out by the wheel so there is no need to work around the exhaust or subframe to adjust camber.

Suspension Strut Assemblies

Don't be bottoming out or bouncing down the road because of old, tired struts. Replace those old tired struts with new ones from Pelican.
Suspension Strut Assembly
Suspension Strut Assembly  
 
[ More Info ]

Note: Front Right, Performance Upgrade (Front Right)

Bilstein Touring Class
$122.00

Shock Absorbers

Don't be bottoming out or bouncing down the road because of old, tired shocks. Replace those old tired shocks with new ones from Pelican.
Shock Absorber  
 
[ More Info ]

  (2 per car, sold individually)
Note: (Rear)

Bilstein Touring Class
$74.50


Shock Absorber (Rear Left or Right)
Koni Shocks
Koni shock absorbers are also an excellent replacement for your shock absorbers. The Konis are a bit more expensive than the Bilsteins, but offer the ability to adjust the level of stiffness for a smoother or more performance-minded ride. The Koni shocks are designed more for the racer market and are a good compromise between a daily-driver shock and a stiffer sport shock.


BMW Home  >  2005 BMW 325xi Base Wagon > Suspension & Steering  >  Suspension, Shocks & Springs 

  Page 1 of 9  123456789>


Browse Suspension, Shocks & Springs for all 3-Series E46 (1999-2006) vehicles

Page last updated: Tue 12/12/2017 11:54:57 PM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window