Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1992 BMW 325i Base Sedan
 
BMW Home > 1992 BMW 325i Base Sedan > Transmission & ClutchClutch & Flywheel  

Clutch & Flywheel

- Page 1

Clutch Super Kits

Clutch Super Kits for E36
In this kit, you get everything you need to replace your clutch all at once. If you are spending the time and effort to pull your engine out of your car, you might as well make sure that you are replacing and fixing every piece that might need attention, while you have access to it. Here's what the kit includes:
  • Three piece clutch kit
  • New Pressure plate bolts
  • Clutch alignment tool
  • New flywheel bolts
  • New crankshaft rear seal (aka flywheel seal)
  • New Transmission Main Shaft seal
  • New selector rod seal
  • New exhaust flange gaskets
  • New pilot bearing
  • New release bearing spring clip
  • New clutch pivot pin
  • New slave cylinder
  • New slave cylinder hose
If you don't already own one, you will also need the flywheel pilot bearing puller tool for removing the flywheel pilot bearing.

NOTE: Flywheels are not included with these kits. If your old flywheel is worn beyond its re-surfacing limit, it should be replaced with a new one available below. Actual kit contents may differ from representative photograph.

Clutch Kits

This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time and also replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, you should have it re-surfaced so your new clutch seats correctly.
Clutch Kit  
 
[ More Info ]

Note: Flywheel does not have provision for Crank Position Sensor, Not for vehicles with crank position sensor, w/ Solid Flywheel

Valeo
Brand Rating
$579.75

Clutch Kit
Clutch Kit  
[ More Info ]

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, Only for use with Dual-Mass Flywheel,

Sachs
Brand Rating
$226.00
SPEC Stage 1 Clutch Kit
SPEC Stage 1 Clutch Kits feature an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications. Some kits may not include the throwout bearing, please contact us to see if your kit does.
SPEC Stage 2 Clutch Kit
SPEC Stage 2 Clutch Kits feature segmented or full faced pure Kevlar disc with steel backing. This lining features excellent drivability like the stage 1, but offers slightly longer life and higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street, drag, pulling and autocross. Some kits may not include the throwout bearing, please contact us to see if your kit does.
SPEC Stage 2+ Clutch Kit
SPEC Stage 2+ Clutch Kits feature a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and Kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, autocross, road racing, pulling, rallye and drift. Some kits may not include the throwout bearing, please contact us to see if your kit does.
SPEC Stage 3 Clutch Kit
SPEC Stage 3 Clutch Kits feature a carbon semi-metallic 6 puck sprung hub disc that has been the leading puck clutch in drivability, life and torque capacity. This unit is designed for street and race cars that require an aggressive but streetable engagement and high torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Also available in 3 puck configuration. Great for street, drag, road racing, pulling, rallye and drift. Some kits may not include the throwout bearing, please contact us to see if your kit does.
SPEC Stage 3+ Clutch Kit
SPEC Stage 3+ Clutch Kits are the flagship stage for a high powered street or race car that requires a manageable and friendly engagement. The stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, drift, autocross, road racing, pulling, rallye and drift. Some kits may not include the throwout bearing, please contact us to see if your kit does.
BMW Home  >  1992 BMW 325i Base Sedan > Transmission & Clutch  >  Clutch & Flywheel  

  Page 1 of 6  123456>


Browse Clutch & Flywheel for all 3-Series E36 (1992-1999) vehicles

Page last updated: Mon 11/13/2017 1:31:18 PM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window