Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1993 BMW 325i Base Convertible
 
BMW Home > 1993 BMW 325i Base Convertible > Transmission & ClutchClutch & Flywheel  

Clutch & Flywheel

- Page 1

Clutch Kits

This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time and also replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, you should have it re-surfaced so your new clutch seats correctly.
Clutch Kit  
 
[ More Info ]

Note: Flywheel does not have provision for Crank Position Sensor, Not for vehicles with crank position sensor, w/ Solid Flywheel

Valeo
Brand Rating
$579.75

Clutch Kit
Clutch Kit  
 
[ More Info ]

Note: Contains: (1) Disc (1) Pressure Plate (1) Release Bearing,

Valeo
Brand Rating
$264.75
Clutch Kit  
[ More Info ]

Note: Contains: (1) Disc (1) Pressure Plate (1) Release Bearing,

Sachs
Brand Rating
$301.00

Clutch Discs

Clutch disks transfer the energy from the engines flywheel to the transmission. If your transmission is slipping or you hear grinding noises you are probably in need of a new clutch. Clutches and pressure plates should always be changed as a group.
Clutch Disc (228 mm)
Clutch Disc (228 mm)  
 
[ More Info ]

Note: Not for cars with dual mass flywheel,

Sachs
Brand Rating
$168.50

Clutch Tools

Pressure Adaptor needed for pressuring the master cylinder or clutch slave cylinder reservoirs. Used in conjunction with a pressure bleeder. Comes with a 1/4-18 NPT threaded opening. Applicable to most European models.

Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm.



These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16.

Clutch Disc Spline Grease

Clutch Disc Spline Grease - SACHS High Performance (80 gram Tube)  
[ More Info ]

Note: Used to lubricate the clutch disc splines and manual trans input shaft splines.

Sachs
Brand Rating
$7.25

Flywheels and Parts

Every time you replace your clutch, you should inspect your flywheel. If it's scored or if there is significant wear in the surface, then you should have it checked and resurfaced. If you have any doubts, replace it with a new one. Scored or burnt flywheels will not create a good mounting surface on which to press the clutch disc, and could very well lead to your clutch slipping later on.
Clutch Flywheel

BMW Home  >  1993 BMW 325i Base Convertible > Transmission & Clutch  >  Clutch & Flywheel  

  Page 1 of 4  1234>


Browse Clutch & Flywheel for all 3-Series E30 (1983-1991) vehicles

Page last updated: Mon 11/13/2017 1:26:13 PM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window