Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1992 BMW 325i Base Convertible
 
BMW Home > 1992 BMW 325i Base Convertible > Suspension & SteeringSuspension Wizard 

Suspension Wizard

- Page 1

Pelican Suspension Wizard

Based on projects in Wayne Dempsey's best-selling books, the Pelican Parts Suspension Wizard will guide you through all the steps required to obtain and source the parts required for your complete suspension overhaul & upgrade.  Walking you carefully through each step, the Suspension Wizard helps you choose the parts that you need for your overhaul, while making sure that you don't end up with the wrong parts or something that you don't really need.  Through eleven easy-to-follow steps, the Wizard guides you through the rebuild process and discusses upgrade options for your suspension setup.

  
Click here to view the Pelican Suspension Wizard!

Suspension Overhaul Tools

You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes with the right tool. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it!
Ball Joint Tools
Ball Joint Tool Kit  
 
[ More Info ]

Note: Used to remove and install the front lower outer ball joint in the control arm. For BMW chassis E30 and E36,

Baum Tools
Brand Rating
$327.75

Ball Joint Tool Kit  
 
[ More Info ]

Note: Used to remove and install the front lower inner ball joint in the control arm. For BMW chassis E30 and E36, All clearance sales are final; no returns allowed.

Baum Tools
Brand Rating
$315.00
Press Arbor Kit/Inner Ball Joint
Designed for the proper removal and installation of the inner ball joints. Used in conjunction with a hydraulic press, or on the car application when used in conjunction with a C-Clamp.
Ball Joint Installation Tools
Mueller-Kueps' Press and Pull Sleeve kit is a universal tool set for extracting and mounting the following: Silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing bushes, etc.
Ideal for various vehicles, due to universal application.
Sleeves inner diameter from 34 - 72 mm

Designed for the proper disassembly of the pitman arm type tie rod ends w/o tearing the ball joint boots.

Designed for the proper disassembly of ball joints on drag links and tie rods. Base of opening is 21.5mm

Designed for the proper disassembly of ball joints from lower wishbone. Base of opening is 25.5mm
CV Joint Removal Tool
Avoid stripping your bolt heads and spending wasted hours cutting and grinding them off by using this special tool to easily remove those pesky CV joint bolts. This tool is for use with 12-point star-shaped bolts only. Please make sure to check your bolts before ordering. It's common for previous owners to replace the 12-point star shaped bolts with more standard allen head bolts instead. Although the 12-point pattern allows you to get a better grip on the bolts (with the correct tool), and apply the high torque that the bolts require, previous owners may have stripped out these bolt heads by attempting to use a torx or hex driver instead of the proper tool. A word of caution here - these other tools MAY work, but if they strip the bolt head, then you are in for an entire afternoon of grinding it off the next time it's replaced.

TIP: Spray the bolts down with WD-40 or Liquid Wrench first to loosen the dirt and debris in the bolt head, then scrape out any dirt that may be left. With the socket on a 6" extension, slip the tool into the bolt head and give it a gentle rap on the end with a mallet to seat it firmly. Following this simple procedure will hopefully avoid you from stripping any CV bolts.

Smart Racing Products Alignment Tools
Using SmartStrings along with the SmartCamber Gauge, developed by Craig Watkins, former chief engineer for Flying Lizard Motorsports, you can now perform a full four-wheel alignment precisely and quickly; at home, in the shop, or at the race track!
BMW Home  >  1992 BMW 325i Base Convertible > Suspension & Steering  >  Suspension Wizard 

  Page 1 of 2  12>


Browse Suspension Wizard for all 3-Series E30 (1983-1991) vehicles

Page last updated: Mon 11/13/2017 1:19:49 PM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window