Original brake lines are rubber and can expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel, and makes for mushy pedal feedback.
UUC's Stainless Steel Brake lines are used to "performance tune" your braking system.
Inner Teflon line is covered with woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. Results will be immediate.
fully compliant with DOT Standards (MVSS-1006)
lines burst-tested to 6000psi (maximum tested pressure from a BMW braking system is 1200psi)
Teflon inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (translucent blue plastic covering).
plastic end pieces protect assembly, no exposed steel fibers to stick fingers.
Speed Bleeders are the latest innovation in bleeding your brakes! Speed Bleeders use a check valve built into the unit to allow both air and fluid in the brake system to flow only one way, preventing it from re-entering the system. Once installed, bleeding your brakes becomes a one-man operation. Each package includes 2 bleeders.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.