This E30 M3 style rear wing is designed to fit the rear trunk lid of all E30 models from 1984 to 1992 including convertibles. However it will not fit the M3 E30 model. The styling is very similar to the factory M3 rear wing. Since there is a considerable amount of down force at high speed attachment requires four 6mm bolts directly to the trunk. Construction is of a high quality hand laminated polyester fiberglass with a gray primer gel coat. Installation requires drilling, sanding priming, and paint.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.