Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1987 BMW 325e Base Sedan
 
BMW Home > 1987 BMW 325e Base Sedan > Transmission & ClutchClutch & Flywheel  

Clutch & Flywheel

- Page 4

Clutch Master Cylinders and Parts

Is your clutch release not working as well as you'd like it to? Are you a slave to your worn out cylinders? Get control with a replacement master or slave clutch cylinder. Replacing the slave cylinder is a good idea when you are performing a clutch job. With a relatively low cost, the insurance of replacing it when you're performing a big clutch job is well worth the cost. The way a hydraulic clutch works is quite simple to understand. When you push the clutch pedal, it sends fluid from the clutch master cylinder down a hose to the clutch slave cylinder, which is mounted on the transmission. The fluid, which is under pressure, forces the clutch cylinder to push out a rod, which is connected mechanically to the release fork. When the rod moves, it also moves the release fork, disengaging the clutch, and allowing you to shift. Also be sure to purge the system of air bubbles at the same time.
Clutch Master Cylinder
Clutch Master Cylinder  
 
[ More Info ]

Note: May req 1x 21 52 1 151 697 Connector

Sanyco
Brand Rating
$52.75


Clutch Pivot Balls

Your pivot balls should always be checked when working on your clutch. If you need new ones Pelican has them.
Pivot Pin - Clutch Release Fork Lever

Clutch Release Arms and Parts

The clutch release arm assists in the release of pressure from the pressure plate on the clutch disk. It should be checked for cracks, wear or bending and should be replaced when doing a clutch replacement.
Fork Lever - Clutch Release Bearing

Clutch Release Bearings and Parts

You should always throw out your old throw-out bearing every time you replace your clutch disc and pressure plate. A loud squeak when the clutch pedal is pressed in can indicate that there is a problem with your throw-out bearing. This can also indicated a flywheel pilot bearing problem as well.
Clutch Release Bearing

Clutch Slave Cylinders

The clutch slave cylinder is operated by the clutch master cylinder. It assists in the movement of the clutch release arm or throw out arm. It is a good idea to replace the slave cylinder if you are replacing the master cylinder.
Clutch Slave Cylinder

Clutch Slave Cylinder Kit
BMW Home  >  1987 BMW 325e Base Sedan > Transmission & Clutch  >  Clutch & Flywheel  

  Page 4 of 5  <12345>


Browse Clutch & Flywheel for all 3-Series E30 (1983-1991) vehicles

Page last updated: Wed 12/13/2017 01:52:12 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window