Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1986 BMW 325e Base Coupe
 
BMW Home > 1986 BMW 325e Base Coupe > Fuel & IntakeFuel Injection 

Fuel Injection

- Page 1

Electronic Control Units

There are a variety of control units through out your car; they utilize various electronic signals to control certain operations of the vehicle. Pelican offers a wide selection of engine control units.
Fuel Injection Electronic Control Unit

Performance Chips

Auto manufacturers often use a conservative ECU map as standard equipment, balancing performance with emissions and fuel economy. Aftermarket vendors experiment with alternative mappings to achieve superior performance.
Turner Motorsport Conforti Performance Chips
With a Conforti Performance Chip, power is boosted at all RPM but most importantly in the upper RPM. The car really feels more alive! This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and spark maps to take advantage of 91 octane gasoline. By making the engine more efficient with this fuel, gains in horsepower and torque are achieved as well as making the engine run smoother.
Turner Motorsport Conforti Performance Chip Note: Horsepower Gain: +24 @ 4500RPM, Torque Gain: + 28 @ 5300RPM, New Rev Limit: 5300RPM. Your car may have a replacement DME ending in 021. This chip will work in this replacement computer as long as the existing chip is not soldered. For US models only.  
 
[ More Info ]

Note: Horsepower Gain: +24 @ 4500RPM, Torque Gain: + 28 @ 5300RPM, New Rev Limit: 5300RPM. Your car may have a replacement DME ending in 021. This chip will work in this replacement computer as long as the existing chip is not soldered. For US models only.

$249.95

Cold Start Injectors and Valves

Is your car having a rough time starting when the engine is cold or hot? It could be your cold start injector, which is used to provide the engine with extra fuel when starting cold. If it is leaking it will also make starting difficult when the engine is hot.
O-Ring - Cold Start Injector

Fuel Injectors

Fuel injectors deliver fuel into the air stream as it enters the combustion camber. The injectors atomize the fuel under pressure. If your car is running poorly the injector should be checked.
Fuel Injector (Rebuilt)
Fuel Injector (Rebuilt)  
 
[ More Info ]

  (6 per car, sold individually)
Note: Note: This is a rebuilt part, a Core Charge of $15.00 applies. What is a Core Charge?

GB Remanufacturing
Brand Rating
$42.75

O-Ring - Fuel Injector (7.52 X 3.53 mm)

Fuel Injection Relays

If your fuel injection stops working the relays should be the first place you check. Don't start replacing expensive components without first checking your relays.

Relay - Fuel Injection (5-Prong)

Relay - Motronic (5-Prong) (White)

BMW Home  >  1986 BMW 325e Base Coupe > Fuel & Intake  >  Fuel Injection 

  Page 1 of 2  12>


Browse Fuel Injection for all 3-Series E30 (1983-1991) vehicles

Page last updated: Wed 8/16/2017 01:41:27 AM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window