Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1986 BMW 325e Base Coupe
 
BMW Home > 1986 BMW 325e Base Coupe > EngineCylinder Head & Valvetrain 

Cylinder Head & Valvetrain

- Page 2

Intake Manifold Resealing Kits
The Intake Manifold Resealing Kits include the rubber intake boot and intake manifold gaskets.

Valves and Guides

A critical part of any head rebuild is new OEM intake and exhaust valves. Many times valves can be reground and reused, however if your valves are too worn to be re-used, Pelican can supply you with the needed parts for your rebuild. Valve Guides act to provide valves with proper lubrication while your engine is running. Any head rebuild should include new Valve Guides. Whenever you replace the valve guides, be sure to check the size of the original valve guide before ordering.
Intake Valve (40 mm) (7 mm Stem)
Intake Valve (40 mm) (7 mm Stem)  
 
[ More Info ]

  (6 per car, sold individually)
Note: 40mm To 11/86

Osvat
Brand Rating
$9.50

Exhaust Valve (34 mm) (7 mm Stem)
Exhaust Valve (34 mm) (7 mm Stem)  
 
[ More Info ]

  (6 per car, sold individually)
Note: 34mm To 11/86

TRW
Brand Rating
$23.00
Exhaust Valve (34 mm) (7 mm Stem)  
 
[ More Info ]

  (6 per car, sold individually)
Note: 34mm To 11/86

Osvat
Brand Rating
$13.75


Valve Guide  
 
[ More Info ]

  (12 per car, sold individually)
Note: .516 inch or 13.11mm O.D., O/S, Oversize

Canyon Engine
Brand Rating
$5.75


Valve Stem Seals
Valve Stem Seal
Valve Stem Seal  
 
[ More Info ]

  (12 per car, sold individually)

Elring Klinger
Brand Rating
$0.75
Valve Stem Seal  
 
[ More Info ]

  (12 per car, sold individually)
Note: 7mm Stem

Reinz
Brand Rating
$0.75

Valve Stem Seal Kit
Intake Valve Cleaner
Intake Valve Cleaner - CRC GDI IVD Intake Valve Cleaner (11 oz. Aerosol Can)  
 
[ More Info ]

Note: Delivers concentrated advanced Cozol technology directly to the backs of intake valves. Dissolves baked-on carbon deposits, improves MPG, increases power and reduces rough idle. Effective for use on gasoline direct injection and port fuel injection engines. Easy to use - spray past the air mass sensor through the air intake.
Alert: This part contains hazardous or explosive materials and cannot be shipped (local pickup only).

CRC Industries
Brand Rating
$13.75

Valve Springs

Valve springs are used to provide constant tension on the valves. Without them, the valves would make contact with the tops of the pistons and cause damage. It's a good idea to have your old valve springs checked by your machine shop to make sure that they have the correct spring tension. If they do not meet the correct specifications, you should replace them with new ones.
Valve Spring - Outer (30.2 mm Diameter)  
 
[ More Info ]

  (12 per car, sold individually)
Note: from 09/85

Genuine BMW
Brand Rating
$14.00

Valve Keeper for 7 mm Valve Stems
BMW Home  >  1986 BMW 325e Base Coupe > Engine  >  Cylinder Head & Valvetrain 

  Page 2 of 4  <1234>


Browse Cylinder Head & Valvetrain for all 3-Series E30 (1983-1991) vehicles

Page last updated: Wed 8/16/2017 01:41:02 AM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window