RaceMax is an Italian company that specializes exclusively in producing high-quality wheel spacers and adapters. RaceMax begins with 6063-T6 aluminum, which is drop forged, then the blanks are CNC machined to within .0005 tolerance. Each piece is then heat treated for stress relief and anodized for corrosion protection. RaceMax spacers thicker than 12mm are machined to include the protruding hub centering rings ("hub centric"), which will always center your wheel for proper wheel balance.
These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer "concept". This is not just a rework of an existing spacer but a ground-up, clean sheet design based on years of BMW service and motorsports.
This latest spacer design incorporates pockets around the entire circumference of the spacer. These pockets allow you to easily pop the spacer off with a flat blade screwdriver without damaging it. TMS starts with very strong and lightweight high-grade aluminum with a strong resistance to corrosion. They go the extra step and have our spacers coated with a military-spec hard-coat for extreme corrosion prevention and with a dark gray color to blend in with your wheel and brake package for best appearance. All Turner Spacers are CNC machined to very tight machining tolerances to save weight while not affecting strength. These spacers are engineered and manufactured to preserve ride quality, last a long time, and enhance your BMW's handling and looks. Each spacer is laser engraved with its size for fast identification.
NOTE: TMS Spacers are suitable for 5-lug (5x120mm) applications ONLY.
Pelican offers a full line of extended lug bolts from H&R to accommodate your new wheel spacers, with lengths all the way up to 68mm. Don't risk using your stock lug bolts when mounting your new wheel spacers. It's simple to find the right size bolt, all you need to do is measure the length of your stock bolt then add the thickness of the desired spacer, and that will be the new required size.
H&R offers bolts in both a silver or black finish with a tapered head to fit your stock wheels.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.