Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2002 BMW 325Ci Base Coupe
 
BMW Home > 2002 BMW 325Ci Base Coupe > Suspension & SteeringSuspension Wizard 

Suspension Wizard

- Page 1

Based on projects in Wayne Dempsey's best-selling books, the Pelican Parts Suspension Wizard will guide you through all the steps required to obtain and source the parts required for your complete suspension overhaul & upgrade.  Walking you carefully through each step, the Suspension Wizard helps you choose the parts that you need for your overhaul, while making sure that you don't end up with the wrong parts or something that you don't really need.  Through eleven easy-to-follow steps, the Wizard guides you through the rebuild process and discusses upgrade options for your suspension setup.

  
Click here to view the Pelican Suspension Wizard!

Suspension Kits for BMW

Is your car bouncing around as you drive? Are you looking to maximize the full handling potential of your BMW? Pelican has the solution. For those of you looking to re-new your suspension, we here at Pelican are now pleased to offer these kits for your car.
 All kits contain the following parts, in addition to those specifically listed in the description:
  • New Struts and Shocks
  • New Front Strut Mounts
  • New Rear Shock Mounts
  • New Bump Stops (where applicable)
  • New Rear Shock Boots
  • New Front Control Arm Bushings
  • New Front Control Arm Ball Joints
  • New Front and Rear Sway Bar End Links
  • New Strut/Shock Mounting Nuts/Bolts
  • New Front and Rear Spring Retaining Pads
Turner Motorsports Adjustable Rear Camber Arms for Stage 3 and Uber Kits
Installing lowering springs on your E36 will result in increased negative camber on the rear wheels. In order to adjust the rear camber, you'll need to install a set of adjustable camber arms. Turner Motorsports offers two bushing styles to meet your needs, a solid Rod-end or Rubber Bushing end. The high range of adjustment allows a full racecar setup or a heavily lowered car to maintain factory specifications. Aluminum camber arms are designed as a lightweight component thereby reducing wear and tear on other, more critical parts (rear subframe, control arm bushings, etc) Each camber arm weighs only 2.5 lbs making for a total of 5 lbs for both parts (stock camber arms weigh 3 lbs each) TMS Camber Arms use hardcoat anodized aluminum, stainless steel turnbuckles, and stainless rod ends to all but eliminate corrosion from getting into the threads and making adjustment difficult. CNC-machined double shear design for ease of installation, high strength, and choice of outside bushing material. But we do suggest using with BMW rear trailing arm bushing # 33-32-6-775-551 for best performance (These bushings are included with all Pelican Uber Kits). Easy and simple to adjust, the main adjustment point is out by the wheel so there is no need to work around the exhaust or subframe to adjust camber.

Suspension Overhaul Tools

You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes with the right tool. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it!
Rear Wheel Bearing Extractor and Installer Kit
If you want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one master kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The tool eliminates the need for such drastic measures such as a slide hammer or flame torch to remove the rear wheel bearing. The tool facilitates the installation and removal of the rear bearings, and makes the whole job 1000% easier.
Rear Trailing Arm Master Kit
Combines 3 OE Tools for On the Car Removal and Installation of the 3 Bushings Located in the Main Rear Trailing Arms. Includes Case. (See below for Specific Bushings and Models)

Bushing (A) 33-32-6-771-828 Lower, outer Bushing
Bushing (B) 33-32-6-770-786 Front of Trailing Arm
Bushing (C) 33-32-6-775-551 Upper, outer Bushing
Ball Joint Installation Tools
Mueller-Kueps' Press and Pull Sleeve kit is a universal tool set for extracting and mounting the following: Silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing bushes, etc.
Ideal for various vehicles, due to universal application.
Sleeves inner diameter from 34 - 72 mm

Designed for the proper disassembly of the pitman arm type tie rod ends w/o tearing the ball joint boots.

Designed for the proper disassembly of ball joints on drag links and tie rods. Base of opening is 21.5mm

Designed for the proper disassembly of ball joints from lower wishbone. Base of opening is 25.5mm
BMW Home  >  2002 BMW 325Ci Base Coupe > Suspension & Steering  >  Suspension Wizard 

  Page 1 of 2  12>


Browse Suspension Wizard for all 3-Series E46 (1999-2006) vehicles

Page last updated: Tue 12/12/2017 11:45:08 PM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers