If you want to get the maximum performance from you suspension you have to be running the right camber. Some drivers like to change their set ups from street to track, or, if you just want to make sure it's right, Pelican has the camber alignment kit for you.
These "fixed" steel camber plates (Legal for J stock) will add 3/4 degree of negative camber and will reduce understeer during hard cornering and save the outside edge of your tire. These plates mount above the upper strut bearing and do not require removal of the bearing to install.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.