Clogged air filters can reduce air flow into the injection system causing reduced power, and inefficiency in the fuel injection system. Replacing a dirty air filter can sometimes do wonders for your engine. Don't go to the effort to replace the filter and not replace leaking O-rings, gaskets and broken hardware.
Dinan's High Flow Intake System consists of an injection molded replacement lid for the stock air box designed to increase overall volume and accommodate a high flow filter element for optimum intake air-flow. The lid is manufactured using a special composite material, chosen specifically for its ability to resist power robbing under-hood heat. The lid also incorporates an O-ring, completely sealing the air box for maximum pressurization and further insulation against heat-soaking, optimizing performance under varying driving conditions. The System also includes a secondary intake duct that scoops up additional cool, oxygen rich air via the factory brake cooling duct, further improving performance as road speed increases.
Advanced Flow Engineering, Inc. (aFe) has designed three different air intake systems to meet the needs of your power hungry engine. For the largest possible performance gain replace the entire air box and intake tract with our STAGE 2 open element air intake system. If you want to maintain a factory appearance our STAGE 2 Si sealed air box provides quiet power. For a great value and easy installation our STAGE 1 air intake systems adds instant horsepower and torque.
aFe Power Magnum Force Stage 2 Systems
Improve your vehicle's power, throttle response, and sound with an aFe Power Stage 2 Intake System. Included in these systems is a rotomolded intake tube that increases air flow and volumetric efficiency, heat-shield assembly, hardware, and your choice of aFe's Pro 5R or their oil-less Pro Dry S filter.
The air mass sensor (meter) measures the amount of air that is flowing into the engine manifold. This sensor is critical to obtaining the proper air/fuel mixture. If you're having problems with your mixture it may be your mass sensor.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.